14. Additional Instructions
14.1 Information for Disposal of Machine (ELV)
The machine is composed of the
following materials:
- Steel structure
- Nylon rollers
- Drive belts in PVC
- Nylon pulleys
For machine disposal, follow the
regulations published in each country.
14.2 Emergency Procedures
In case of danger/fire:
Disconnect plug of power cable
from power supply (Figure 14-1).
IN CASE OF FIRE
Use a fire extinguisher that is rated for
electrical fires (Figure 14-2).
15. Additional Information
15.1 Statement of Conformity
See Section 1.
15.2 Emission of Hazardous Substances
Nothing to report
15.3 List of Safety Features
List of components/assemblies with safety
functions
- LATCHING EMERGENCY STOP BUTTON
- Thermal cut-out relay
- Fixed guards upper drive belts
- Blade guard assemblies on both taping heads
Important: Install earth wire protection on
All safety features/components must be
explained and highlighted to all operators and
to the person responsible for spare parts in
order to ensure that these components are
always on hand or ordered as a priority procedure.
ONLY USE ORIGINAL REPLACEMENT PARTS
15.4 Copies of Test Reports, Certifications (etc.)
Required by User
Electrical tests
1 - Earth continuity
2 - Insulation resistance
3 - High voltage test
Reference; EN60204-1 par. 20.2.,3.,4.
3M-Matic
7000a-I / 7000a3-I Pro - Type 11700
™
Page 37
44-0009-2164-1 / ECO# 0078045
electrical installation.
Source Document for all related Manuals/Translations
Original Instruction
Figure 14-1
Figure 14-2
International - ENG
February 2021