Page 2
Minimum billing on parts orders will be $25.00. Replacement part prices available on request. $10.00 restocking charge per invoice on returned parts. Note : Outside the U.S., contact the local 3M subsidiary for parts ordering information. 3M Packaging Systems Division "3M-Matic", "AccuGlide"...
Page 3
Replacement Parts And Service Information To Our Customers: This is the 3M-Matic™/AccuGlide™/Scotch™ brand equipment you ordered. It has been set up and tested in the factory with "Scotch" brand tapes. If any problems occur when operating this equipment, and you desire a service call, or phone consultation, call, write or Fax the appropriate number listed below.
Instruction Manual 800asb, Type 29600 Adjustable Case Sealer This instruction manual is divided into two sections as follows: Section Includes all information related to installation, operation and parts for the case sealer. Section Includes specific information regarding the AccuGlide™ STD 1-1/2 Inch Taping Heads Table of Contents Page Section...
Page 5
Table of Contents (Continued) Page Adjustments ............................. Drive Belt Tension ......................Taping Head Adjustments .................... Special Set-Up Procedure ......................... 27 - 31 Drive Belt Height ....................Disassemble ....................Reassemble ....................Changing Tape Leg Length ................. Box Height Range ....................28 - 31 Troubleshooting ..........................