Additional Instructions; Machine Disposal Information; Fire Emergency; Statement Of Conformity - 3M -Matic 7000r-I Instructions And Parts List

14. Additional Instructions

14.1 Information for Disposal of Machine (ELV)
The machine is composed of the
following materials:
- Steel structure
- Nylon rollers
- Drive belts in PVC
- Nylon pulleys
For machine disposal, follow the
regulations published in each country.
14.2 Emergency Procedures
In case of danger/fire:
Disconnect plug of power cable
from power supply (Figure 14-1).
IN CASE OF FIRE
Use a fire extinguisher that is rated for
electrical fires (Figure 14-2).
15. Additional Information

15.1 Statement of Conformity

See Section 1.
15.2 Emission of Hazardous Substances
Nothing to report
15.3 List of Safety Features
List of components/assemblies with safety
functions
- LATCHING EMERGENCY STOP BUTTON
- Thermal cut-out relay
- Fixed guards upper drive belts
- Blade guard assemblies on both taping heads
Important: Install earth wire protection on
All safety features/components must be
explained and highlighted to all operators and
to the person responsible for spare parts in
order to ensure that these components are
always on hand or ordered as a priority procedure.
ONLY USE ORIGINAL REPLACEMENT PARTS
15.4 Copies of Test Reports, Certifications (etc.)
Required by User
Electrical tests
1 -
2 - Insulation resistance
3 - High voltage test
Reference; EN60204-1 par. 20.2.,3.,4.
3M-Matic 7000r-I / 7000r3-I Pro - Type 11700
™
Page 53
44-0009-2165-8 / ECO# 0078045
electrical installation.
Earth continuity
Original Instructions
Source Document for all related Manuals/Translations
Figure 14-1
Figure 14-2
International - ENG
February 2021