3M -Matic 8000a Instructions And Parts List
  1. Manuals
  2. Brands
  3. 3M Manuals
  4. Food Saver
  5. 3M-Matic 8000a
  6. Instructions and parts list

3M -Matic 8000a Instructions And Parts List

Adjustable case sealer with accuglide 3 taping heads
Hide thumbs Also See for 3M-Matic 8000a:
Table of Contents

Advertisement

Quick Links

Instructions and Parts List
3M-Matic
Type 11600
Adjustable Case Sealer with
AccuGlide
Serial #:
Important Safety Information
BEFORE INSTALLING OR OPERATING THIS EQUIPMENT
Read, understand and follow all safety and operating instructions.
Spare Parts
It is recommended you immediately order the spare parts listed in the "Spare
Parts/Service Information" section. These parts are expected to wear through
normal use, and should be kept on hand to minimize production delays.
3M-Matic
8000a-8000a3
™
Page i
8000a-8000a3
™
3 Taping Heads
™
For reference, record machine serial number here.
NA - ENG
March 2017

Advertisement

Table of Contents
loading

Related Manuals for 3M 3M-Matic 8000a

Summary of Contents for 3M 3M-Matic 8000a

  • Page 1 Instructions and Parts List 3M-Matic 8000a-8000a3 ™ Type 11600 Adjustable Case Sealer with AccuGlide 3 Taping Heads ™ Serial #: For reference, record machine serial number here. Important Safety Information BEFORE INSTALLING OR OPERATING THIS EQUIPMENT Read, understand and follow all safety and operating instructions.
  • Page 2 NA - ENG 3M-Matic 8000a-8000a3 ™ April 2016 Page ii...

  • Page 3: Replacement Parts And Service Information

    Replacement Parts and Service Information To Our Customers: This is the 3M-Matic /AccuGlide /Scotch equipment you ordered. ™ ™ ® It has been set up and tested in the factory with Scotch Tapes. ® Included with each machine is an Instructions and Parts List Manual.
  • Page 4 NA - ENG 3M-Matic 8000a-8000a3 ™ April 2016 Page iv...
  • Page 5 Replacement Parts and Service Information To Our Customers: This is the 3M-Matic /AccuGlide /Scotch equipment you ordered. ™ ™ ® It has been set up and tested in the factory with Scotch tapes. If any problems occur ® when operating this equipment and you desire a service call or phone consultation, call, write, or fax the appropriate number listed below.
  • Page 6 NA - ENG 3M-Matic 8000a-8000a3 ™ April 2016 Page vi...

  • Page 7: Table Of Contents

    4.11 Box Weight and Size Capacities ......13 – 14 4.12 Machine and Packaged Machine Dimensions .....15 NA - ENG 3M-Matic 8000a-8000a3 ™...
  • Page 8 NA - ENG 3M-Matic 8000a-8000a3 ™ April 2016 Page viii...
  • Page 9 11.6 Run Boxes to Check Adjustment ......26 NA - ENG 3M-Matic 8000a-8000a3 ™...
  • Page 10 NA - ENG 3M-Matic 8000a-8000a3 ™ April 2016 Page x...
  • Page 11 Drawings and Parts Lists ......43 – End of Manual Taping Head Information Manual 2: AccuGlide ™ 3 Taping Heads — 2 Inch or 3 Inch (See Manual 2 or 3 for Table of Contents) NA - ENG 3M-Matic 8000a-8000a3 ™ April 2016 Page xi...
  • Page 12 AccuGlide ..Trademark of 3M St. Paul, MN 55144-1000 Scotch ..Trademark of 3M St. Paul, MN 55144-1000 Drw... . Drawing Ex.

  • Page 13: Introduction

    1. Introduction Manufacturing Specifi cations / Description / Intended Use The 3M-Matic 8000a-8000a3 Adjustable Case Sealer with AccuGlide ™ ™ Taping Heads is designed to apply a “C” clip of Scotch pressure-sensitive fi lm ® box sealing tape to the top and bottom center seam of regular slotted containers.

  • Page 14: How To Read And Use The Manual

    3M Industrial Adhesives and Tapes Division 3M Center, Bldg. 220-5E-06 St. Paul, MN 55144-1000 (USA) Edition April 2016 © 3M 2016. All rights reserved. The manufacturer reserves the right to change the product at any time without notice. Publication © 3M 2016 44-0009-2134-4.

  • Page 15: General Information

    2. General Information 2.1 Data Identifying Manufacturer and Machine For Commercial Use Only Data for Technical Assistance and Service Agent/Distributor or Local After Sale Service: NA - ENG 3M-Matic 8000a-8000a3 ™ April 2016 Page 3...
  • Page 16 3M. A part will be presumed to have become defective after its warranty period unless the part is received or 3M is notifi ed of the problem no later than fi ve (5) calendar days after the warranty period. If 3M is unable to repair or replace the part within a reasonable time, then 3M at its option, will replace the equipment or refund the purchase price.

  • Page 17: Safety

    Indicates a potentially hazardous situation, which, if not Warning avoided, could result in death or serious injury and/or property damage. NA - ENG 3M-Matic 8000a-8000a3 ™ April 2016 Page 5...

  • Page 18: Table Of Warnings

    Never put your hands inside any part of the machine is running. the machine while it is working. Serious injury may occur (Figure 3-4). NA - ENG 3M-Matic 8000a-8000a3 ™ April 2016 Page 6...
  • Page 19 - Keep hands, hair, loose clothing, and jewelry away from box compression rollers. - Always feed boxes into the machine Figure 3-8 by pushing only from the end of box. NA - ENG 3M-Matic 8000a-8000a3 ™ April 2016 Page 7...

  • Page 20: Number Of Operators

    - Allow only properly trained and qualifi ed - The operator must pay attention personnel to operate and service this to the blades during the tape equipment. replacement. NA - ENG 3M-Matic 8000a-8000a3 ™ April 2016 Page 8...
  • Page 21 Extraordinary mechanical maintenance protections disabled Extraordinary electrical maintenance Stopped by pressing Adjusting box size the EMERGENCY STOP Tape replacement button Blade replacement Electric power Drive belt replacement disconnected Ordinary maintenance NA - ENG 3M-Matic 8000a-8000a3 ™ April 2016 Page 9...

  • Page 22: Component Locations

    Width Adjustment Crank Infeed Conveyor (optional - not shown) Electrical On/Off Switch (Alternate) Lower Tape Roll Mount (not shown) Casters (optional) Figure 3-9 8000a-8000a3 Case Sealer Components (Left Front View) NA - ENG 3M-Matic 8000a-8000a3 ™ April 2016 Page 10...

  • Page 23: Table Of Warnings And Replacement Labels

    78-8137-7402-9 78-8070-1366-5 78-8137-7404-5 78-8070-1318-6 78-8070-1329-3 78-8137-1331-6 78-8113-6717-2 78-8137-7406-0 78-8060-8481-6 Leg Height Adjustment Label (not shown) 78-8137-7404-5 78-8137-0886-0 3M Logo (not shown) 78-8113-6717-2 Figure 3-10 Replacement Labels / 3M Part Numbers NA - ENG 3M-Matic 8000a-8000a3 ™ April 2016 Page 11...

  • Page 24: Power Requirements

    The machine is equipped with two 1/6 HP gearmotors and comes with a 2.4m [8 foot] standard neoprene covered power cord and a grounded plug. Contact your 3M Representative for power requirements not listed above. 4.2 Operating Rate: Belt speed is 0.5m/s [100 F.P.M.] Actual production rate is dependent on operator’s dexterity.

  • Page 25: Set-Up Recommendations

    “Special Set-Up Procedure” section of this manual. Refer to illustration/chart for box height range possibilities by adjusting machine upper frame and/or outer column positioning. NA - ENG 3M-Matic 8000a-8000a3 ™ April 2016...
  • Page 26 Special modifi cations may be available for carton sizes not listed on previous page. Contact your 3M Representative for information. Note: The case sealer can accommodate most boxes within the size range listed above. However, if the box length (in direction of seal) to box height ratio is .6 or less, several boxes should be test run to assure proper machine performance.
  • Page 27 Height (H) - 49 1/2" [1257] Length (L) - 51" [1295] Width (W) - 42" [1067] Weight: Crated Weight - 190 kg [425 pounds] (approximate) Uncrated Weight - 170 kg [375 pounds] (approximate) NA - ENG 3M-Matic 8000a-8000a3 ™ April 2016 Page 15...

  • Page 28: Shipment, Handling, And Storage 5.1 Packed Machine Shipment And Handling

    - Do not stack anything over the machine. - It is possible to stack a maximum Figure 5-4 of 2 machines (if they are in their original packing). NA - ENG 3M-Matic 8000a-8000a3 ™ April 2016 Page 16...

  • Page 29: Unpacking

    (sea freight package only) - Polyethylene protective material For the disposal of the above materials, please follow the environmental directives or the law in your country. . Figure 6-5 NA - ENG 3M-Matic 8000a-8000a3 ™ April 2016 Page 17...

  • Page 30: Installation

    5 - For Outer Column Positioning - The columns are shipped in a lower position. To Adjust Columns - See Special Figure 7-3 Set-up Procedure (Section 11) . NA - ENG 3M-Matic 8000a-8000a3 ™ April 2016 Page 18...

  • Page 31: Plastic Ties Removal

    - (Figure 7-7A). Figure 7-5 2. Tape Drum Bracket - Install upper tape drum bracket on top cross bar as shown (Figure 7-7B). Figure 7-6 Figure 7-7 NA - ENG 3M-Matic 8000a-8000a3 ™ April 2016 Page 19...

  • Page 32: Taping Heads Completion

    (as shown in Figure 7-9). complies with the safety regulations of your country. NA - ENG 3M-Matic 8000a-8000a3 ™ April 2016 Page 20...

  • Page 33: Theory Of Operation

    8.3.2 Emergency Stop The LATCHING EMERGENCY STOP BUTTON is located on the top center of the machine (Figure 8-3). Belt Direction Figure 8-3 NA - ENG 3M-Matic 8000a-8000a3 ™ April 2016 Page 21...

  • Page 34: Controls

    9.1 Box Width Adjusting Knobs Figure 9-1 9.2 Box Height Adjusting Crank Figure 9-2 9.3 On/Off Switch Figure 9-3 On/Off Switch E-Stop Switch 9.4 Latching Emergency Stop Button Figure 9-4 NA - ENG 3M-Matic 8000a-8000a3 ™ April 2016 Page 22...

  • Page 35: Safety Devices

    − Allow only properly trained and qualifi ed • Have wire size 1.5mm dia. [AWG 16] personnel to operate and service this • Have a max. length 30.5m [100 ft] equipment. • Be properly grounded. NA - ENG 3M-Matic 8000a-8000a3 ™ April 2016 Page 23...

  • Page 36: Set-Up And Adjustments

    To change tape leg length to 50mm [2.0 inches], refer to Instructions below and also to Manual 2, “Removing Taping Heads Procedure - Changing the Tape Leg Length”. Figure 11-3 NA - ENG 3M-Matic 8000a-8000a3 ™ April 2016 Page 24...
  • Page 37 5. Tighten the eight (8) screws and washers in each column. Also tighten two Set Screws (if applicable)(continued on next page) Note: Loosen but do not Remove Column Screws 305mm Min. Figure 11-7 NA - ENG 3M-Matic 8000a-8000a3 ™ April 2016 Page 25...

  • Page 38: Column Repositioning

    Important – If drive belts are allowed to slip on box, excessive belt wear will occur. NA - ENG 3M-Matic 8000a-8000a3 ™ April 2016 Page 26...

  • Page 39: Operation

    OFF (O) 1. Taping units blade guard switch on the main and disconnect 2. Latching emergency stop button electric power (Figure 12-3). 3. STOP (OFF) (O) main switch NA - ENG 3M-Matic 8000a-8000a3 ™ April 2016 Page 27...
  • Page 40 Worn or missing friction rings Replace friction rings Drive belt tension too low Adjust belt tension Electrical disconnect Check power and electrical plug Motor not turning Evaluate problem and correct (continued on next page) NA - ENG 3M-Matic 8000a-8000a3 ™ April 2016 Page 28...

  • Page 41: Trouble Shooting

    The blade is not cutting tape properly Refer to tape cutting problems The tape is threaded incorrect Rethread tape Applying mechanism spring Move spring hook to next has too little tension tighter hole NA - ENG 3M-Matic 8000a-8000a3 ™ April 2016 Page 29...
  • Page 42 NA - ENG 3M-Matic 8000a-8000a3 ™ April 2016 Page 30...

  • Page 43: Safety Measures (See Section 3)

    If this dust is allowed to build up on machine components, it can cause NA - ENG 3M-Matic 8000a-8000a3 ™ April 2016 Page 31...
  • Page 44 13. Maintenance and Repairs (continued) 13.8 Box Drive Belt Replacement WARNING Note – 3M recommends the replacement of drive belts in pairs, especially if belts • To reduce the risk associated with are unevenly worn. mechanical and electrical hazards: 1. Crank the upper taping head to its - Read, understand, and follow all safety fully raised position.
  • Page 45 If torn, machine or taping heads. broken, or worn smooth, replace the rings (Figure 13-3). Figure 13-2 Box Drive Assembly (Infeed End) NA - ENG 3M-Matic 8000a-8000a3 ™ April 2016 Page 33...

  • Page 46: Box Drive Belt Tensioning

    To adjust belts, see “Maintenance – voltage: Drive Belts”, steps 3 and 7. - Turn electrical supply off and disconnect before performing any adjustments, maintenance or servicing the machine or taping heads. NA - ENG 3M-Matic 8000a-8000a3 ™ April 2016 Page 34...
  • Page 47 Changing Tape Leg Length from See “Adjustments – Changing Tape 70 to 48mm [2-3/4 to 2 inches] – Manual 2 Leg Length” for taping head set-up. Figure 13-5 Removing Taping Heads From Case Sealer NA - ENG 3M-Matic 8000a-8000a3 ™ April 2016 Page 35...
  • Page 48 NA - ENG 3M-Matic 8000a-8000a3 ™ April 2016 Page 36...
  • Page 49 ________ _____________________________________________________ ________ _____________________________________________________ ________ _____________________________________________________ ________ _____________________________________________________ ________ _____________________________________________________ ________ _____________________________________________________ ________ _____________________________________________________ ________ _____________________________________________________ ________ _____________________________________________________ ________ _____________________________________________________ ________ _____________________________________________________ ________ _____________________________________________________ ________ _____________________________________________________ ________ _____________________________________________________ ________ _____________________________________________________ NA - ENG 3M-Matic 8000a-8000a3 ™ April 2016 Page 37...

  • Page 50: Additional Instructions

    Use a fi re extinguisher that is rated for electrical fi res (Figure 14-2). Figure 14-2 15. Additional Information 15.1 Statement of Conformity 15.2 Emission of Hazardous Substances Nothing to report NA - ENG 3M-Matic 8000a-8000a3 ™ April 2016 Page 38...

  • Page 51: Technical Documentation And Information

    16. Technical Documentation and Information 16.1 Technical Diagrams - Electric EStop 2 PE 115V 1Ph 60Hz. NA - ENG 3M-Matic 8000a-8000a3 ™ April 2016 Page 39...
  • Page 52 • Figure Number In the event that any labels are damaged • Position or destroyed, they must be replaced to • 3M Part Number (11 Digits) ensure operator safety. A label kit, • Description part number 78-8137-7540-6, is • Quantity available as a stock item.
  • Page 53 Important – Not all the parts listed are normally stocked items. Some parts or assemblies shown are available only on special order. Contact 3M/ Tape Dispenser Parts to confi rm item availability NA - ENG 3M-Matic 8000a-8000a3 ™...
  • Page 54 NA - ENG 3M-Matic 8000a-8000a3 ™ April 2016 Page 42...
  • Page 55 8000a-8000a3 Figure 15967 Figure 15946 Figure 15968 Figure 15968 Figure 15870 Figure 15964 Figure 15971 Figure 15969 (Not Shown) Figure 15978 Figure 15963 Frame Assemblies NA - ENG 3M-Matic 8000a-8000a3 ™ April 2016 Page 43...
  • Page 56 8000a-8000a3 Figure 15870 NA - ENG 3M-Matic 8000a-8000a3 ™ April 2016 Page 44...
  • Page 57 8000a-8000a3 Figure 15870 Figure 15870 Ref. No. 3M Part No. Description 15870-1 78-8137-7878-0 Support - Compression Roller 15870-2 78-8017-9074-8 Washer - Nylon - 10,5/18X1 15870-3 78-8054-8974-3 Compression Roller 15870-4 78-8137-7881-4 Pin - Compression Roller 15870-5 26-1004-5510-9 Washer - M10 - Galvanized...
  • Page 58 8000a-8000a3 Note: Part Number 19 - 3” Taping Head only Note: See Parts List for Accuglide 2” and 3” information Figure 15967 NA - ENG 3M-Matic 8000a-8000a3 ™ April 2016 Page 46...
  • Page 59 8000a-8000a3 Figure 15967 Ref. No. 3M Part No. Description 15967-1 78-8017-9169-6 Nut - M18x1 - Galvanized 15967-2 78-8137-1158-3 Tape Drum Bracket Assembly 15967-3 78-8070-1395-4 Bracket - Bushing Assembly 15967-4 78-8076-4519-3 Shaft - Tape Drum 2” 78-8060-8462-6 Shaft - Tape Drum 3”...
  • Page 60 8000a-8000a3 00 22 Figure 15968 NA - ENG 3M-Matic 8000a-8000a3 ™ April 2016 Page 48...
  • Page 61 8000a-8000a3 Figure 15968 Ref. No. 3M Part No. Description 15968-1 78-8137-8101-6 Frame 15968-2 78-8028-8214-8 Washer - M5 15968-3 78-8076-4625-8 Screw - M5X16 15968-4 78-8060-7693-7 Roller - 32X38 15968-5 78-8137-8102-4 Pin - 8X136 15968-6 78-8137-8103-2 Washer - M6 15968-7 78-8137-7893-9 Housing - M22-IY1...
  • Page 62 8000a-8000a3 37 41 Conveyors Optional Casters Optional Figure 15963 NA - ENG 3M-Matic 8000a-8000a3 ™ April 2016 Page 50...
  • Page 63 Figure 15963 Figure 15963 Ref. No. 3M Part No. Description 15963-1 78-8137-8109-9 Bed Assy. w/Nutzers 15963-2 78-8137-8110-7 Support Assy. - Taping Unit 15963-3 26-1000-0010-3 Washer - M6 Flat 15963-4 78-8137-6295-8 Bracket - Fixed Column 15963-5 78-8010-7193-3 Screw - M6X20 Hex. Hd.
  • Page 64 8000a-8000a3 Figure 15971 NA - ENG 3M-Matic 8000a-8000a3 ™ April 2016 Page 52...
  • Page 65 15971-4 78-8137-8068-7 15971-5 78-8137-8069-5 Support 15971-6 78-8137-8070-3 Spring 15971-7 78-8137-8071-1 Support 15971-8 78-8129-6113-0 Bushing - 130CF-3M/S8 Centering Screw 15971-9 78-8137-8072-9 Screw - Right 15971-10 78-8137-8073-7 Block - Nylon 15971-11 78-8137-5915-2 Connection Sleeve - S8-CE 3” 15971-12 78-8137-8074-5 Screw - Left...
  • Page 66 8000a-8000a3 Figure 15946 NA - ENG 3M-Matic 8000a-8000a3 ™ April 2016 Page 54...
  • Page 67 8000a-8000a3 Figure 15965 Ref. No. 3M Part No. Description 15946-1 78-8137-7906-9 Bracket - Column 15946-2 78-8010-7169-3 Screw - M6X12 Hex Hd. 15946-3 78-8137-6335-2 Sliding Column Assembly 15946-4 78-8129-6311-0 Plate 15946-5 78-8137-6348-5 Label - Column 15946-6 78-8137-8038-0 Nut - Support Assembly...
  • Page 68 8000a-8000a3 25 26 26 59 Figure 15964 / 1 Left NA - ENG 3M-Matic 8000a-8000a3 ™ April 2016 Page 56...
  • Page 69 Figure 15964 / 1 Left Ref. No. 3M Part No. Description 15964-1 78-8129-6469-6 15964-2 78-8076-4532-6 Cord Grip 15964-3 78-8070-1522-3 Gearmotor 115V 60HZ 26-1011-8828-7 Capacitor (only) 15964-4 78-8060-7918-8 Screw - Flat Soc. Hd. M6X25 15964-5 78-8060-7886-7 Screw - Hex Hd. M6X16 Special...
  • Page 70 8000a-8000a3 38 41 Figure 15964 / 2 Right NA - ENG 3M-Matic 8000a-8000a3 ™ April 2016 Page 58...
  • Page 71 Figure 15964 / 2 Right Ref. No. 3M Part No. Description 15964-1 78-8129-6469-6 15964-2 78-8076-4532-6 Cord Grip 15964-3 78-8070-1522-3 Gearmotor 115V 60HZ 26-1011-8828-7 Capacitor (only) 15964-4 78-8060-7886-7 Screw - Hex Hd. M6X16 Special 15964-5 26-1003-5842-8 Screw - Hex Hd. M8X20...
  • Page 72 8000a-8000a3 Figure 15969 NA - ENG 3M-Matic 8000a-8000a3 ™ April 2016 Page 60...
  • Page 73 8000a-8000a3 Figure 15969 Figure 15969 Ref. No. 3M Part No. Description 15969-1 78-8137-7805-3 Housing 15969-2 78-8076-4702-5 Grommet 15969-3 26-1003-7963-0 Screw - M8X16 Soc. Hd. 15969-4 78-8010-7163-6 Screw - M5X10 Hex Hd. 15969-5 78-8005-5741-1 Washer - M5 Flat 15969-6 78-8010-7417-6 Nut - M5 Hex Steel...
  • Page 74 8000a-8000a3 Figure 15978 NA - ENG 3M-Matic 8000a-8000a3 ™ April 2016 Page 62...
  • Page 75 8000a-8000a3 Figure 15978 Figure 15978 Ref. No. 3M Part No. Description 15978-1 78-8094-6384-3 Clamp - 6 1492-WG6 - Ground 15978-2 78-8137-0607-0 Fitting - M20X1.5 15978-3 78-8129-6469-6 Nut - M20X1.5 15978-4 78-8137-0796-1 Plug 15978-5 78-8137-0604-7 Coil - Under Voltage 15978-6 78-8137-0606-2...
  • Page 76 NA - ENG 3M-Matic 8000a-8000a3 ™ April 2016 Page 64...

  • Page 77: Spare Parts / Ordering

    Instructions and Parts List 3M-Matic Accuglide ™ ™ Type 11400 Upper and Lower High Speed Taping Heads 2 Inch Serial #: For reference, record machine serial number here. Important Safety Information BEFORE INSTALLING OR OPERATING THIS EQUIPMENT Read, understand and follow all safety and operating instructions.
  • Page 78 NA - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head ™ April 2016 Page ii...
  • Page 79 Replacement Parts and Service Information To Our Customers: This is the 3M-Matic /AccuGlide /Scotch equipment you ordered. ™ ™ ® It has been set up and tested in the factory with Scotch Tapes. ® If technical assistance or replacement parts are needed, call or fax the appropriate number listed below.
  • Page 80 NA - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head ™ April 2016 Page iv...
  • Page 81 Replacement Parts and Service Information (continued) To Our Customers: This is the 3M-Matic /AccuGlide /Scotch equipment you ordered. It has been set ™ ™ ® up and tested in the factory with Scotch tapes. If any problems occur when operating ®...
  • Page 82 NA - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head ™ April 2016 Page vi...
  • Page 83 Replacement Parts and Service ......19-20 Replacement Parts Illustrations and Parts List ..21-End of Manual NA - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head ™...
  • Page 84 3M to its factory or other authorized service station designated by 3M. If 3M is unable to repair or replace the part within a reasonable time after receipt thereof, 3M, at its option, will replace the equipment or refund the purchase price.

  • Page 85: Intended Use

    ® seam of regular slotted containers. These taping heads are incorporated into most standard 3M-Matic™ case sealers. The compact size and simplicity of the taping head also makes it suitable for mounting in box conveying systems other than 3M-Matic™ case sealers. This includes replacement of other types of taping, gluing or stapling heads in existing case sealing machines.
  • Page 86 NA - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head ™ April 2016 Page 2...

  • Page 87: Taping Head Contents / How To Use Manual

    (ELV), a glossary with a defi nition of symbols, plus a parts list of the 3M-Matic™ Accugllide 3 (2 inch) 3M Industrial Adhesives and Tapes Division 3M Center, Bldg. 220-5E-06 St. Paul, MN 55144-1000 (USA) Edition April 2016/ Copyright 3M 2016.

  • Page 88: Important Safeguards

    The blades are extremely sharp. system is running (Important Safeguards continued on next page) NA - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head ™ April 2016 Page 4...
  • Page 89 See "Replacement Parts Illustrations and Parts Lists" for label part numbers. Upper Taping Head Label 78-8137-3317-3 Lower Taping Head Label 78-8137-3316-5 78-8070-1335-0 Figure 1-1 Replacement Labels/3M Part Numbers NA - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head ™...

  • Page 90: Specifi Cations

    5. Box Size Capacities: For use with center seam regular slotted containers. When upper and lower taping heads are used on “3M-Matic” case sealers, refer to the respective instruction manual specifi cations for box weight and size capacities. 6. Operating Rate: Conveyor speeds up to 0.5 m/s [100 feet per minute].

  • Page 91: Dimensional Drawing

    * This dimension can be reduced to 90mm [3-1/2 in.] when both heads are converted to 50mm [2 in.] tape leg lengths. Figure 2-1 Dimensional Drawing NA - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head ™ April 2016 Page 7...

  • Page 92: Installation

    Taping Head is supplied with a buffi ng the transportation company and also arm guard. Adjustments to guard may notify your 3M Representative. be required to install taping head into some older design case sealers. Installation Guidelines 4.

  • Page 93: Operation

    Spring One-Way Tension Roller Tape Adhesive Side Tape Supply Roll Tape Drum Figure 3-2 Taping Head Components/Threading Diagram - Lower Head (Left Side View) NA - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head ™ April 2016 Page 9...

  • Page 94: Tape Loading - Upper Taping Head

    2. Lower taping head is loaded and Figure 3-3 Tape Loading/Threading threaded in same manner as upper head. NA - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head ™ April 2016 Page 10...
  • Page 95 Excess tape can be cut with a scissors at applying roller. Figure 3-4 Tape Loading/Threading Figure 3-5 Tape Loading/Threading NA - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head ™ April 2016 Page 11...

  • Page 96: Maintenance

    Silicone. Should tape adhesive build-up occur on blade, carefully wipe clean with an oily cloth. (Maintenance continued on next page.) NA - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head ™ April 2016 Page 12...

  • Page 97: Cleaning

    Insert a 4mm hex key wrench into this socket after removing one screw to hold the shaft for removal of the second screw. See Figure 4-2. NA - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head ™ April 2016 Page 13...

  • Page 98: Adjustments

    - Never attempt to work on the taping head or load tape while the box drive system is running (adjustments continued on next page.) NA - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head ™ April 2016 Page 14...

  • Page 99: Applying Mechanism Spring

    - Never attempt to work on the taping Figure 5-5 One-Way Tension Roller head or load tape while the box drive system is running (Adjustments continued on next page.) NA - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head ™ April 2016 Page 15...

  • Page 100: One-Way Tension Roller

    - Keep hands and fi ngers away from tape head or load tape while the box drive cutoff blades under orange blade guards. system is running The blades are extremely sharp. NA - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head ™ April 2016 Page 16...

  • Page 101: Troubleshooting Guide

    Make sure one-way bearing is contacting the taping head frame below the surface of the tension roller. If not, press bearing further into roller or replace roller. NA - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head ™ April 2016 Page 17...
  • Page 102 Tape not centered on box seam Centering guides not centered Adjust centering guides Box fl aps not of equal length Check box specifi cations NA - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head ™ April 2016 Page 18...

  • Page 103: Spare Parts/Service Information

    Roller – Buffi ng 78-8113-7030-9 Spring – Torsion Replacement Parts and Service Refer to the fi rst page of this instruction manual “Replacement Parts and Service Information". NA - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head ™ April 2016 Page 19...
  • Page 104 NA - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head ™ April 2016 Page 20...
  • Page 105 Information" for replacement parts ordering information. Important – Not all the parts listed are normally stocked items. Some parts or assemblies shown are available only on a special order basis. Contact 3M/Tape Dispenser Parts to confi rm item availability. NA - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head ™...
  • Page 106 NA - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head ™ April 2016 Page 22...
  • Page 107 Tape Head Figures AccuGlide ™ 3 - 2 inch Figure 10401 Figure 10925 Figure 10924 Figure 10923 Figure 10922 Figure 10919 Figure 10921 Figure 10920 NA - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head ™ April 2016 Page 23...
  • Page 108 ™ AccuGlide 3 - 2" Figure 10925 – Upper Head NA - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head ™ April 2016 Page 24...
  • Page 109 ™ AccuGlide 3 - 2" Figure 10925 – 2" Upper Head Ref. No. 3M Part No. Description 10925-1 78-8137-3294-4 Frame – Tape Mount Upper Assembly 10925-2 78-8137-3295-1 Frame – Front Upper Assembly 10925-3 78-8068-4143-9 Guide – #1 10925-4 78-8068-4144-7 Guide – #2...
  • Page 110 ™ AccuGlide 3 - 2" 12 11 Figure 10922 – Upper and Lower Heads NA - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head ™ April 2016 Page 26...
  • Page 111 ™ AccuGlide 3 - 2" Figure 10922 – 2" Upper and Lower Heads Ref. No. 3M Part No. Description 10922-1 78-8133-9509-8 Applying Arm #1 10922-2 78-8133-9510-6 Applying Arm #2 10922-3 78-8070-1221-2 Plate – Tape 10922-4 78-8070-1309-5 Shaft Roller 10922-5 78-8070-1367-3 Roller –...
  • Page 112 ™ AccuGlide 3 - 2" 12 11 Figure 10919 – Upper Head NA - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head ™ April 2016 Page 28...
  • Page 113 ™ AccuGlide 3 - 2" Figure 10919 – 2" Upper Head Ref. No. 3M Part No. Description 10919-1 78-8137-3300-9 Buffi ng Arm – Sub Assembly 10919-2 78-8137-3301-7 Buffi ng Arm – Sub Assembly 10919-3 78-8052-6575-4 Shaft – Roller 10919-4 78-8137-1398-5 Roller - Buffi...
  • Page 114 AccuGlide ™ 3 - 2" Figure 10923 – Upper and Lower Heads Figure 10923 Upper and Lower Heads NA - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head ™ April 2016 Page 30...
  • Page 115 ™ AccuGlide 3 - 2" Figure 10923 – 2" Upper and Lower Heads Ref. No. 3M Part No. Description 10923-1 78-8137-3302-5 Link – Assembly 10923-3 78-8137-3304-1 Shaft – Pivot, Buffi ng 10923-4 78-8017-9082-1 Bearing – Special 30 mm 10923-5 78-8017-9106-8 Screw –...
  • Page 116 ™ AccuGlide 3 - 2" Figure 10921 – Upper and Lower Heads NA - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head ™ April 2016 Page 32...
  • Page 117 ™ AccuGlide 3 - 2" Figure 10921 – 2" Upper and Lower Heads Ref. No. 3M Part No. Description 10921-1 78-8137-3307-4 Frame – Cut-Off Weldment 10921-2 78-8017-9173-8 Blade – 65 mm/2.56 Inch 10921-3 26-1003-8596-7 Screw - Hex Hd M5 x 8 w/ Ext. Tooth Lockwasher...
  • Page 118 ™ AccuGlide 3 - 2" Figure 10401 – Upper and Lower Heads NA - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head ™ April 2016 Page 34...
  • Page 119 ™ AccuGlide 3 - 2" Figure 10401 – 2" Latch Upper and Lower Heads Ref. No. 3M Part No. Description 10401-1 78-8070-1395-4 Bracket – Bushing Assembly 10401-2 78-8076-4519-3 Shaft – Tape Drum, 50mm 10401-3 78-8017-9169-6 Nut – M18 x 1...
  • Page 120 ™ AccuGlide 3 - 2" 17 19 Figure 10924 – Lower Head NA - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head ™ April 2016 Page 36...
  • Page 121 ™ AccuGlide 3 - 2" Figure 10924 – 2" Lower Head Ref. No. 3M Part No. Description 10924-1 78-8137-3296-9 Frame – Tape Mount Lower Assembly 10924-2 78-8137-3297-7 Frame – Front Lower Assembly 10924-3 78-8068-4144-7 Guide – #2 10924-4 78-8068-4143-9 Guide – #1...
  • Page 122 ™ AccuGlide 3 - 2" Figure 10920 – Lower Head NA - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head ™ April 2016 Page 38...
  • Page 123 AccuGlide ™ 3 - 2" Figure 10920– Lower Head Ref. No. 3M Part No. Description 10920-1 78-8137-3300-9 Buffi ng Arm – Sub Assembly 10920-2 78-8137-3301-7 Buffi ng Arm – Sub Assembly 10920-3 78-8052-6575-4 Shaft – Roller 10920-4 78-8137-1398-5 Roller - Buffi ng Assembly...
  • Page 124 NA - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head ™ April 2016 Page 40...
  • Page 125 NA - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head ™ April 2016 Page 41...
  • Page 126 NA - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head ™ April 2016 Page 42...
  • Page 127 Instructions and Parts List 3M-Matic Accuglide ™ ™ Type 11400 Upper and Lower High Speed Taping Heads 3 Inch Serial #: For reference, record machine serial number here. Important Safety Information BEFORE INSTALLING OR OPERATING THIS EQUIPMENT Read, understand and follow all safety and operating instructions.
  • Page 128 NA - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ April 2016 Page ii...
  • Page 129 Replacement Parts and Service Information To Our Customers: This is the 3M-Matic /AccuGlide /Scotch equipment you ordered. ™ ™ ® It has been set up and tested in the factory with Scotch Tapes. ® If technical assistance or replacement parts are needed, call or fax the appropriate number listed below.
  • Page 130 NA - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ April 2016 Page iv...
  • Page 131 Replacement Parts and Service Information (continued) To Our Customers: This is the 3M-Matic /AccuGlide /Scotch equipment you ordered. It has been set ™ ™ ® up and tested in the factory with Scotch tapes. If any problems occur when operating ®...
  • Page 132 NA - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ April 2016 Page vi...
  • Page 133 Replacement Parts and Service ......19-20 Replacement Parts Illustrations and Parts List ..21-End of Manual NA - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™...

  • Page 134: Equipment Warranty And Limited Remedy

    3M to its factory or other authorized service station designated by 3M. If 3M is unable to repair or replace the part within a reasonable time after receipt thereof, 3M, at its option, will replace the equipment or refund the purchase price.

  • Page 135: Intended Use

    ® seam of regular slotted containers. These taping heads are incorporated into most standard 3M-Matic™ case sealers. The compact size and simplicity of the taping head also makes it suitable for mounting in box conveying systems other than 3M-Matic™ case sealers. This includes replacement of other types of taping, gluing or stapling heads in existing case sealing machines.
  • Page 136 NA - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ April 2016 Page 2...
  • Page 137 (ELV), a glossary with a defi nition of symbols, plus a parts list of the 3M-Matic™ Accugllide 3 (3 inch) 3M Industrial Adhesives and Tapes Division 3M Center, Bldg. 220-5E-06 St. Paul, MN 55144-1000 (USA) Edition April 2016/ Copyright 3M 2016.

  • Page 138: Important Safeguards

    The blades are extremely sharp. system is running (Important Safeguards continued on next page) NA - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ April 2016 Page 4...
  • Page 139 See "Replacement Parts Illustrations and Parts Lists" for label part numbers. Upper Taping Head Label 78-8137-3317-3 Lower Taping Head Label 78-8137-3316-5 78-8070-1335-0 Figure 1-1 Replacement Labels/3M Part Numbers NA - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™...

  • Page 140: Specifi Cations

    90mm [3-1/2 inches] (with optional 2 inch leg length) Case Sealer Width – 150mm [6 inches] When upper and lower taping heads are used on “3M-Matic” case sealers, refer to the respective instruction manual specifi cations for box weight and size capacities.
  • Page 141 * This dimension can be reduced to 90mm [3-1/2 in.] when both heads are converted to 50mm [2 in.] tape leg lengths. Figure 2-1 Dimensional Drawing NA - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ April 2016 Page 7...

  • Page 142: Installation

    Taping Head is supplied with a buffi ng the transportation company and also arm guard. Adjustments to guard may notify your 3M Representative. be required to install taping head into some older design case sealers. Installation Guidelines 4.

  • Page 143: Operation

    Spring One-Way Tension Roller Tape Adhesive Side Tape Supply Roll Tape Drum Figure 3-2 Taping Head Components/Threading Diagram - Lower Head (Left Side View) NA - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ April 2016 Page 9...

  • Page 144: Tape Loading - Upper Taping Head

    2. Lower taping head is loaded and Figure 3-3 Tape Loading/Threading threaded in same manner as upper head. NA - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ April 2016 Page 10...
  • Page 145 Excess tape can be cut with a scissors at applying roller. Figure 3-4 Tape Loading/Threading Figure 3-5 Tape Loading/Threading NA - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ April 2016 Page 11...

  • Page 146: Maintenance

    Silicone. Should tape adhesive build-up occur on blade, carefully wipe clean with an oily cloth. (Maintenance continued on next page.) NA - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ April 2016 Page 12...

  • Page 147: Cleaning

    Insert a 4mm hex key wrench into this socket after removing one screw to hold the shaft for removal of the second screw. See Figure 4-2. NA - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ April 2016 Page 13...

  • Page 148: Adjustments

    - Never attempt to work on the taping head or load tape while the box drive system is running (adjustments continued on next page.) NA - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ April 2016 Page 14...

  • Page 149: Applying Mechanism Spring

    - Never attempt to work on the taping Figure 5-5 One-Way Tension Roller head or load tape while the box drive system is running (Adjustments continued on next page.) NA - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ April 2016 Page 15...

  • Page 150: One-Way Tension Roller

    - Keep hands and fi ngers away from tape head or load tape while the box drive cutoff blades under orange blade guards. system is running The blades are extremely sharp. NA - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ April 2016 Page 16...

  • Page 151: Troubleshooting Guide

    Make sure one-way bearing is contacting the taping head frame below the surface of the tension roller. If not, press bearing further into roller or replace roller. NA - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ April 2016 Page 17...
  • Page 152 Tape not centered on box seam Centering guides not centered Adjust centering guides Box fl aps not of equal length Check box specifi cations NA - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ April 2016 Page 18...

  • Page 153: Spare Parts/Service Information

    Roller – Buffi ng 78-8113-7030-9 Spring – Torsion Replacement Parts and Service Refer to the fi rst page of this instruction manual “Replacement Parts and Service Information". NA - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ April 2016 Page 19...
  • Page 154 NA - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ April 2016 Page 20...
  • Page 155 Information" for replacement parts ordering information. Important – Not all the parts listed are normally stocked items. Some parts or assemblies shown are available only on a special order basis. Contact 3M/Tape Dispenser Parts to confi rm item availability. NA - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™...
  • Page 156 NA - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ April 2016 Page 22...
  • Page 157 AccuGlide ™ 3 - 3 inch Figure 10402 Figure 10932 (Upper) Figure 10931 (Lower) Figure 10930 Figure 10929 Figure 10926 (Upper) Figure 10928 Figure 10927 (Lower) NA - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ April 2016 Page 23...
  • Page 158 ™ AccuGlide 3 - 3” Figure 10932 – Upper Head NA - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ April 2016 Page 24...
  • Page 159 ™ AccuGlide 3 - 3” Figure 10932 – Upper Head Ref. No. 3M Part No. Description 10932-1 78-8137-3294-4 Frame – Tape Mount Upper Assembly 10932-2 78-8137-3295-1 Frame – Front Upper Assembly 10932-3 78-8068-4143-9 Guide – #1 10932-4 78-8068-4144-7 Guide – #2...
  • Page 160 ™ AccuGlide 3 - 3” Figure 10929 – Upper and Lower Heads NA - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ April 2016 Page 26...
  • Page 161 ™ AccuGlide 3 - 3” Figure 10929 – Upper and Lower Heads Ref. No. 3M Part No. Description 10929-1 78-8133-9520-5 Arm – Applying, R/H 10929-2 78-8133-9521-3 Arm – Applying, L/H 10929-3 78-8070-1292-3 Plate – Back-Up 10929-4 78-8076-4736-3 Shaft Roller 10929-5 78-8076-4737-1 Roller Assembly –...
  • Page 162 ™ AccuGlide 3 - 3” Figure 10926 – Upper Head NA - ENG 3M-Matic ™ Accuglide 3 - 3 Inch Taping Head April 2016 Page 28...
  • Page 163 ™ AccuGlide 3 - 3” Figure 10926 – Upper Head Ref. No. 3M Part No. Description 10926-1 78-8137-3300-9 Buffi ng Arm – Sub Assembly 10926-2 78-8137-3301-7 Buffi ng Arm – Sub Assembly 10926-3 78-8091-0799-4 Shaft – 10 x 85, W/Hexagon...
  • Page 164 ™ AccuGlide 3 - 3” Figure 10930 – Upper and Lower Heads NA - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ April 2016 Page 30...
  • Page 165 ™ AccuGlide 3 - 3” Figure 10930 – Upper and Lower Heads Ref. No. 3M Part No. Description 10930-1 78-8137-3302-5 Link – R/H Assembly 10930-3 78-8137-3314-0 Shaft – Pivot, Buffi ng 10930-4 78-8017-9082-1 Bearing – Special 30 mm 10930-5 78-8017-9106-8 Screw –...
  • Page 166 AccuGlide ™ 3 - 3” Figure 10928 – Upper and Lower Heads NA - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ April 2016 Page 32...
  • Page 167 ™ AccuGlide 3 - 3” Figure 10928 – 3" Upper and Lower Heads Ref. No. 3M Part No. Description 10928-1 78-8070-1283-2 Frame – Cut-Off 10928-2 78-8028-7899-7 Knife – 89 mm/3.5 Inch 10928-3 26-1002-5817-2 Screw – Hex Hd, M5 x 8...
  • Page 168 ™ AccuGlide 3 - 3” Figure 10402 – Upper and Lower Heads NA - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ April 2016 Page 34...
  • Page 169 ™ AccuGlide 3 - 3” Figure 10402 – 3" Latch Upper and Lower Heads Ref. No. 3M Part No. Description 10402-1 78-8070-1395-4 Bracket – Bushing Assembly 10402-2 78-8060-8462-6 Shaft – Tape Drum, 3 Inch Head 10402-3 78-8017-9169-6 Nut – M18 x 1...
  • Page 170 ™ AccuGlide 3 - 3” 17 19 Figure 10931 – Lower Head NA - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ April 2016 Page 36...
  • Page 171 ™ AccuGlide 3 - 3” Figure 10931 – Lower Head Ref. No. 3M Part No. Description 10931-1 78-8137-3296-9 Frame – Tape Mount Lower Assembly 10931-2 78-8137-3297-7 Frame – Front Lower Assembly 10931-3 78-8068-4144-7 Guide – #2 10931-4 78-8068-4143-9 Guide – #1...
  • Page 172 ™ AccuGlide 3 - 3” Figure 10927 – Lower Head NA - ENG 3M-Matic ™ Accuglide 3 - 3 Inch Taping Head April 2016 Page 38...
  • Page 173 AccuGlide ™ 3 - 3” Figure 10927 – Lower Head Ref. No. 3M Part No. Description 10927-1 78-8137-3300-9 Buffi ng Arm – Sub Assembly 10927-2 78-8137-3301-7 Buffi ng Arm – Sub Assembly 10927-3 78-8091-0799-4 Shaft – 10 x 85, W/Hexagon...
  • Page 174 NA - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ April 2016 Page 40...
  • Page 175 NA - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ April 2016 Page 41...
  • Page 176 NA - ENG 3M-Matic Accuglide 3 - 3 Inch Taping Head ™ April 2016 Page 42...

This manual is also suitable for:

3m-matic 8000a311600

Table of Contents