Table of Contents
Advertisement
PARK BRAKE
Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
PARK BRAKE
B
The rear brake includes a park brake consisting of a
wheel brake lever. The wheel brake lever is controlled by
a cable that is attached to the hand operated lever.
Lubrication
When lubricating the park brake,
use the recommended dry spray
lubricant. Commercial lubricant can
attract dirt and accelerate wear.
The hand operated park brake lever requires periodic
lubrication with a dry graphite or molybdenum disulfide
lubricant. Lift the lever and spray underneath to access
the pivot arm and ratchet mechanism of the park brake.
Refer to the Scheduled Maintenance in the GENERAL
INFORMATION AND ROUTINE MAINTENANCE section
of this manual for recommended lubrication schedule.
Cable Replacement
Tool List
Needle Nose Pliers...................................................... 1
Straight Blade Screwdriver .......................................... 1
Wrench, 7/16" .............................................................. 1
Ratchet ........................................................................ 1
Socket, 7/16" ............................................................... 1
Replace the cables when they become inoperable.
Remove the retaining ring (1) securing the cable (2) to the
park brake levers (Figure 1).
Remove the park brake boot (3) from the park brake lever
(4). Remove the bolts (5), flat washers (6) and lock nuts
(7) to remove the park brake lever (4).
Remove the retaining rings (8), clevis pin (9) and cotter
pin (10) and remove the park brake cable (11).
Install a new cable in reverse order of removal and adjust
the park brake system.
76
Quantity
Repair and Service Manual
653045
Advertisement
Table of Contents
