Recommended Lubricants And Fluids - Cushman HAULER 1200 Repair Manual

Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
Item
S Air filter
E
S Oil filter
S Engine oil
CVT belt
Direction selector
Steering
Rack end ball joint
S Rear axle
S Front wheel bearings
S Brakes
S Muffler/exhaust system
Valves - intake/exhaust
S Spark plug
E
S Fuel filter
Carburetor
Cylinder head and piston
Cylinder head and piston
Rear axle

RECOMMENDED LUBRICANTS AND FLUIDS

Check and lubricate all components at the intervals
shown in the SCHEDULED MAINTENANCE CHART.
Item
Engine oil 1.4 qt. (1.3 L)
653045
Interval
(perform at interval
that comes first)
Hours Calendar
125 6 Months
125 6 Months
125 6 Months
125 6 Months
125 6 Months
125 6 Months
125 6 Months
250-300 Yearly
250-300 Yearly
250-300 Yearly
250-300 Yearly
250-300 Yearly
250 Yearly
250 Yearly
500 5 years
500 5 years
500 5 years
500 5 years
Capacity
10W-30
10W-30
10W-40
Repair and Service Manual
SCHEDULED MAINTENANCE
Inspect; clean or replace as necessary.
Replace (with oil change).
Replace. See RECOMMENDED LUBRICANTS AND FLU-
IDS for type and capacity.
Inspect for cracks, fraying and excessive wear.
Check for wear and smooth movement; lubricate shaft with
light oil if necessary.
Inspect bellows and pinion seal for damage and leakage.
Check for noise and loose or missing hardware.
Check fluid level; add if required.
Check and adjust as necessary.
Clean and adjust.
Check brake shoe linings; replace if necessary.
Check hardware. Inspect for leaks at head and muffler gas-
kets.
Check cold.
Replace and gap new.
Replace.
Clean.
Remove carbon.
Check valve seats for carbon buildup; clean if necessary.
Replace fluid.
Lubricants/Fluids
Light duty use engines
Heavy duty use in air temperatures
below 40º F (4º C)
Heavy duty use in air temperatures
above 40º F (4º C) after 100 hour
break-in period
Remarks
Notes
B
155