Table of Contents
Advertisement
Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
HAULER 1200- GENERAL SPECIFICATIONS
Engine: 13.5 hp (10.1 kW) Exceeds SAE J1940 Standard, 4 cycle, 24.5 ci (401 cc) single cylinder, air-cooled by Kawasaki
• Valve Train: Overhead valve
• Lubrication: Pressurized oil system, spin-on oil filter • Ignition: Electronic spark / magneto
• Balancer: Internal counter rotating balance shaft
Electrical: Starter / Generator, solid-state regulator, 12 Volt maintenance free battery (425 CCA, 60 minute reserve)
Drive Train: Automatic, continuously variable transmission (CVT)
Brakes: Dual rear wheel mechanical self-adjusting drum brakes. Automatic single point park brake release with self-compensating system
Transaxle: Differential with helical gears, ground speed governor, forward / reverse
Cargo Bed: Roto-molded cross-linked polyethylene. Lifts for access to powertrain. Removable hinged multi-position tailgate with cam over latch mechanism
Item
Overall Length
Overall Width
Overall Height (No Canopy)
Overall Height (With Canopy)
Wheel Base
Front Wheel Track
Rear Wheel Track
Ground Clearance (at Differential)
Cargo Box Width (inside)
Cargo Box Length (inside)
Cargo Box Depth (inside)
Cargo Box Capacity
Cargo Box material
Power Source
Valve Train
Horsepower (kW)
Electrical System
Batteries (Qty, Type)
Key or Pedal Start
Air Cleaner
Lubrication
Oil Filter
Cooling System
Max Fuel Volume
Drive Train
Transaxle
Gear Selection
Rear Axle Ratio
Seating Capacity
Dry Weight
Curb Weight
Bed Load Capacity
Vehicle Load Capacity
Outside Clearance Circle
653045
GENERAL SPECIFICATIONS
• Fuel System: Fixed float bowl with remote pulse fuel pump
• Air Cleaner: Replaceable dry cartridge
115.0 in (292.10 cm)
49.4 in (125.48 cm)
47.3 in (120.14 cm)(Top of steering wheel)
70.5 in (179.07 cm)
76.8 in (195.07 cm)
35.0 in (88.90 cm)
38.5 in (97.79 cm)
3.5 in (8.89 cm)
44.0 in (111.76 cm)
39.0 in (99.06 cm)
12 in (30.48 cm)
12 cu ft (0.34 cu m)
Roto-molded polyethylene
4 Cycle 24.5 cu in (401 cc)
Single Cylinder OHV
13.5 hp (10.1 kW) Exceeds SAE J1940 Std.
Starter / Generator. Solid State Regulator
One, 12 Volt Maintenance Free
Pedal
Replaceable Dry Cartridge
Pressurized Oil System
Spin-On
Air Cooled
6.0 Gallon (22.7 L) tank
Continuously variable transmission (CVT)
Differential with helical gears
Forward - Reverse
11.42:1 (Forward) 15.78:1 (Reverse)
2 Persons
940 lb (426.38 kg)
980 lb (444.52 kg)
800 lb (362.87 kg)
1200 lb (544.31 kg)
21.5 ft (7.01 m)
Repair and Service Manual
GENERAL SPECIFICATIONS
Specification
B
149
Advertisement
Table of Contents
