Front Body Components; Instrument Panel Replacement - Cushman HAULER 1200 Repair Manual

BODY
Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.

Front Body Components

B
Front of Vehicle

Instrument Panel Replacement

Tool List
Drill .............................................................................. 1
Drill Bit, #10 ................................................................. 1
Wrench, 5/16" .............................................................. 1
Phillips Screwdriver ..................................................... 1
Pry Bar......................................................................... 1
Punch, Small ............................................................... 1
Hammer....................................................................... 1
Pop Rivet Tool ............................................................. 1
14
2
1
4
10
Figure 4 Front Body Components
Quantity
Repair and Service Manual
9
6
8
5
NOTICE: The instrument panel can be removed with-
out removing the cowl, or may be removed as part
of the cowl.
To decrease the risk of injury due to
lack of vehicle information, the cor-
rect safety label must be on the instrument panel at
all times. To decrease the risk of personal injury,
disconnect negative (BL-) battery cables before ser-
vicing vehicle
Pull up the front edge of the floor mat (3) to expose the
rivets (4) that secure the instrument panel (1) to the vehi-
cle frame(Figure 4). Drill out the three rivets (4) that
secure the instrument panel to the frame. Drill out the two
rivets (6) that secure the instrument panel to the cowl (2).
Drill out the two rivets (5) and (10) that attach the instru-
7
4
3
653045