Lexus ES 250 Owner's Manual page 60

restraint system can be used in the seating positions for "fixture" mentioned in the
table above. For kind of "fixture", confirm the following table.
If your child restraint system has no kind of "fixture" (or if you cannot find informa-
tion in the table below), please refer to the child restraint system "vehicle list" for
compatibility information or ask the retailer of your child seat.
Fixture
F3 Full-height, forward-facing child restraint systems
F2 Reduced-height forward-facing child restraint systems
F2X Reduced-height forward-facing child restraint systems
R3 Full-size, rearward-facing child restraint systems
R2 Reduced-size, rearward-facing child restraint systems
R2X Reduced-size, rearward-facing child restraint systems
R1 Rearward-facing infant seat
B2 Junior seat
B3 Junior seat
L1 Left lateral-facing (carrycot) infant seat
L2 Right lateral-facing (carrycot) infant seat
When securing some types of child
restraint systems in rear seat, it may not
be possible to properly use the seat
belts in positions next to the child
restraint without interfering with it or
affecting seat belt effectiveness. Be
sure your seat belt fits snugly across
your shoulder and low on your hips. If it
does not, or if it interferes with the child
restraint, move to a different position.
Failure to do so may result in death or
serious injury.
 When installing a child restraint in
the rear seats, adjust the front seat
so that it does not interfere with the
child or child restraint system.
 When installing a child seat with
1-2. Child safety
Description
support base, if the child seat inter-
feres with the seatback when latch-
ing it into the support base, adjust
the seatback rearward until there is
no interference.
 If the seat belt shoulder anchor is
ahead of the child seat belt guide,
move the seat cushion forward.
59
1