Lexus ES 250 Owner's Manual page 291

290
4-5. Using the driving support systems
enabled/disabled simultaneously.
Use the meter control switches to
enable/disable the parking support
brake. (P.111)
1
Press or
2
Press or
then press "OK".
When the Parking Support Brake is dis-
abled, the PKSB OFF indicator (P.100)
illuminates on the multi-information dis-
play.
To re-enable the system, select
multi-information display, select
then On. If the system is disabled, it will
remain off even if the engine switch is
turned to IGNTION ON mode after the
engine switch has been turned off.
Displays and buzzers for engine
output restriction control and
brake control
If the engine output restriction control or
brake control operates, a buzzer will sound
and a message will be displayed on the
Center Display and multi-information dis-
play, to alert the driver. On vehicles with
head-up display, the head-up display will
display the same message as the multi-
information display.
Depending on the situation, engine output
restriction control will operate to either
limit acceleration or restrict output as
much as possible.
 Engine output restriction control is
operating (acceleration restriction)
Acceleration greater than a certain
amount is restricted by the system.
Center Display (Panoramic view monitor):
No warning displayed
Multi-information display: "Object
Detected Acceleration Reduced"
PKSB OFF indicator: Not illuminated
Buzzer: Does not sound
to select .
 Engine output restriction control is
to select and
The system has determined that stronger-
than-normal brake operation is necessary.
Center Display (Panoramic view monitor):
"BRAKE!"
on the
Multi-information display: "BRAKE!"
and
PKSB OFF indicator: Not illuminated
Buzzer: Short beep
 Brake control is operating
The system determined that emergency
braking is necessary.
Center Display (Panoramic view monitor):
"BRAKE!"
Multi-information display: "BRAKE!"
PKSB OFF indicator: Not illuminated
Buzzer: Short beep
 Vehicle stopped by system opera-
The vehicle has been stopped by brake
control operation.
Center Display (Panoramic view monitor):
"Press Brake Pedal"
Multi-information display: "Switch to
Brake" (If the accelerator pedal is not
depressed, "Press Brake Pedal" will be dis-
played.)
PKSB OFF indicator: Illuminated
Buzzer: Short beep
operating (output restricted as
much as possible)
tion