Lexus ES 250 Owner's Manual page 406

For vehicles sold in Singapore

For vehicles sold in Indonesia

For vehicles sold in Vietnam

Installing tire pressure warning
valves and transmitters
When replacing tires or wheels, tire
pressure warning valves and transmit-
ters must also be installed.
When new tire pressure warning
valves and transmitters are installed,
new ID codes must be registered in the
tire pressure warning computer and
the tire pressure warning system must
be initialized. (P.408)
When replacing the tires and wheels
■
(vehicles with the tire pressure warning
system)
If the ID code of the tire pressure warning
valve and transmitter is not registered, the
tire pressure warning system will not work
properly. After driving for about 10 minutes,
the tire pressure warning light blinks for 1
minute and stays on to indicate a system
malfunction.
6-3. Do-it-yourself maintenance
NOTICE
Repairing or replacing tires, wheels,
■
tire pressure warning valves, trans-
mitters and tire valve caps (vehicles
with the tire pressure warning sys-
tem)
● When removing or fitting the wheels,
tires or the tire pressure warning
valves and transmitters, contact your
Lexus dealer as the tire pressure warn-
ing valves and transmitters may be
damaged if not handled correctly.
● Make sure to install the tire valve caps.
If the tire valve caps are not installed,
water could enter the tire pressure
warning valves and the tire pressure
warning valves could be bound.
When replacing tire valve caps, do not
●
use tire valve caps other than those
specified. The cap may become stuck.
405
6