Lexus ES 250 Owner's Manual page 364

opener motor for details.
2 Press and release the "Learn" or
"Smart" button.
3
Perform within 30 seconds after per-
forming 2.
3
Press and hold the desired
®
HomeLink button (inside the
vehicle) for 2 seconds and release
it. Repeat this sequence
(press/hold/release) up to 3 times
to complete programming.
If the garage door opener motor operates
®
when the HomeLink button is pressed,
the garage door opener motor recognizes
5-6. Using the other interior features
®
the HomeLink signal.
Enabling 2-way communication
■
with a garage door (only available
for compatible devices)
When enabled, 2-way communication
allows you to check the status of the
opening and closing of a garage door
through indicators in your vehicle.
2-way communication is only available
if the garage door opener motor used
is a compatible device. (To check
device compatibility, refer to
www.homelink.com.)
1 Within 5 seconds after program-
ming the garage door opener has
been completed, if the garage door
opener motor is trained to
®
HomeLink , both garage door
operation indicators will flash rap-
idly (green) and the light on the
garage door opener motor will
blink twice, indicating that 2-way
communication is enabled.
If the indicators do not flash, perform
3 within the first 10 presses of the
®
HomeLink button after programming
has been completed.
2
Press a programmed HomeLink
button to operate a garage door.
363
5
2 and
®