Lexus ES 250 Owner's Manual page 154

Recording a driving position into
memory
1 Check that the shift lever is in P.
2
Turn the engine switch to IGNI-
TION ON mode.
3
Adjust the driver's seat, steering
wheel, outside rear view mirrors
and head-up display (if equipped)
to the desired positions.
4
While pressing the "SET" button, or
within 3 seconds after the "SET"
button is pressed, press button "1",
"2" or "3" until the buzzer sounds.
If the selected button has already been
preset, the previously recorded position
will be overwritten.
Vehicles with the driving position
memory for the front passenger's seat:
To record the position of the front pas-
senger's seat, adjust the front passen-
ger's seat to the desired position and
4
perform step using the buttons on
the front passenger's side.
Seat positions that can be memorized
■
(P.150)
The positions adjusted by the following pro-
cedure can be recorded:
Seat position adjustment
●
3-3. Adjusting the seats
Seatback angle adjustment
●
● Seat cushion (front) angle adjustment
Vertical height adjustment
●
■ In order to correctly use the driving
position memory function
If a seat position is already in the furthest
possible position and the seat is operated in
the same direction, the recorded position
may be slightly different when it is recalled.
WARNING
Seat adjustment caution
■
Take care during seat adjustment so that
the seat does not strike the rear passen-
ger or squeeze your body against the
steering wheel.
Recalling a driving position
1
Check that the shift lever is in P.
2
Turn the engine switch to IGNI-
TION ON mode.
3
Press one of the buttons for the
driving position you want to recall
until the buzzer sounds.
■ To stop the position recall operation
part-way through
Perform any of the following:
Press the "SET" button.
●
● Press button "1", "2" or "3".
Operate any of the seat adjustment
●
153
3