276
4-5. Using the driving support systems
When an object is detected, a graphic will
be displayed on the panoramic view moni-
tor (if equipped).
Turning Lexus parking assist-sen-
sor on/off
Use the meter control switches to
enable/disable the Lexus parking
assist-sensor. (P.111)
1
Press
or
2
Press
or
and then press "OK"
3
Press
or
then press "OK".
When the Lexus parking assist-sensor
is disabled, the Lexus parking assist-
sensor OFF indicator (P.98) illumi-
nates on the multi-information dis-
play.To re-enable the system, select
on the multi-information display, select
abled, it will remain off even if the
engine switch is turned to IGNITION
ON mode after the engine switch has
been turned off.
to select
.
to select "PKSA"
to select
, and
and turn it on. If the system is dis-
WARNING
When using the Lexus parking assist-
■
sensor
Observe the following precautions.
Failing to do so may result in the vehicle
being unable to be driven safely and pos-
sibly cause an accident.
●
Do not use the sensor at speeds in
excess of 10 km/h (6 mph).
●
The sensors' detection areas and reac-
tion times are limited. When moving
forward or reversing, check the areas
surrounding the vehicle (especially the
sides of the vehicle) for safety, and
drive slowly, using the brake to control
the vehicle's speed.
Do not install accessories within the
●
sensors' detection areas.
The area directly under the bumpers is
●
not detected.
Thin posts or objects lower than the
sensor may not be detected when
approached, even if they have been
detected once.
When to disable the function
■
In the following situations, disable the
function as it may operate even though
there is no possibility of a collision.
●
The vehicle is equipped with a fender
pole, wireless antenna or fog lights.
The front or rear bumper or a sensor
●
receives a strong impact.
●
A non-genuine Lexus suspension
(lowered suspension, etc.) is installed.
●
Towing eyelets are installed.
A backlit license plate is installed.
●