Lexus ES 250 Owner's Manual page 114

*2
: This distance is computed based on
your average fuel consumption. As a
result, the actual distance that can be
driven may differ from that displayed.
*3
: When only a small amount of fuel is
added to the tank, the display may not
be updated.
When refueling, turn the engine switch
off. If the vehicle is refueled without
turning the engine switch off, the display
may not be updated.
Eco Driving Indicator
■
Eco Driving Indicator Light
A
During Eco-friendly acceleration (Eco
driving), the Eco Driving Indicator Light
will turn on. When the acceleration
exceeds the Zone of Eco driving, or when
the vehicle is stopped, the light turns off.
Eco Driving Indicator Zone Display
B
Suggests the Zone of Eco driving with cur-
rent Eco driving ratio based on accelera-
tion.
Eco driving ratio based on acceler-
C
ation
If the acceleration exceeds the Zone of
Eco driving, the right side of the Eco Dri-
2-1. Instrument cluster
ving Indicator Zone Display will illuminate.
At this time, the Eco Driving Indicator Light
will turn off.
Zone of Eco driving
D
G-force (F SPORT models)
■
Displays lateral G-forces on the vehi-
cle.
Acceleration G-force on the vehi-
A
cle
Current G-force value (analyzed
B
value of front/rear and left/right G-
forces)
Record of the maximum G-forces
C
This display is intended for use as a guide-
line. Depending on factors such as the road
surface condition, temperature and vehicle
speed, the display may not show the actual
condition of the vehicle.
 Resetting the record of maximum
G-forces
Press and hold "OK" of the meter control
switches to reset the record.
 Peak hold function
If lateral G-forces of 0.5 G or greater are
generated, the G-force value display will
turn amber and be held for 2 seconds.
113
2