Lexus ES 250 Owner's Manual page 119

118
2-1. Instrument cluster
Head-up display switch
D
■ Head-up display will operate when
The engine switch is in IGNITION ON
mode.
■ When using the head-up display
The head-up display may seem dark or hard
to see when viewed through sunglasses,
especially polarized sunglasses. Adjust the
brightness of the head-up display or
remove your sunglasses.
■ Street name display
Only street names which are included in the
map data will be displayed.
WARNING
When using the head-up display
■
Check that the position and brightness
●
of the head-up display image does not
interfere with safe driving. Incorrect
adjustment of the image's position or
brightness may obstruct the driver's
view and lead to an accident, resulting
in death or serious injury.
● Do not continuously look at the head-
up display while driving as you may fail
to see pedestrians, objects on the
road, etc. ahead of the vehicle.
NOTICE
Head-up display projector
■
● Do not place any drinks near the head-
up display projector. If the projector
gets wet, electrical malfunctions may
result.
Do not place anything on or put stick-
●
ers onto the head-up display projector.
Doing so could interrupt head-up dis-
play indications.
Do not touch the inside of the head-up
●
display projector or thrust sharp edges
or the like into the projector.
Doing so could cause mechanical mal-
functions.
Using the head-up display
Enabling/disabling the head-up dis-
■
play
Press the head-up display switch.
Changing settings of the head-up
■
display
The following settings can be changed
on of the multi-information display.
(P.482)
 Brightness and vertical position of
the head-up display
Select to adjust the brightness or vertical
position of the head-up display.
 Tachometer/Eco Driving Indicator
Select to display the tachometer, Eco Dri-
ving Indicator or no content.
 Display content