Lexus ES 250 Owner's Manual page 63

62
1-2. Child safety
*3
*2, 3
Suitable for fixed with vehicle seat
belt "universal" category child
restraint system.
Suitable for child restraint systems
given on recommended child
restraint systems and compatibility
table (P. 64).
Suitable for i-Size and ISOFIX
child restraint system.
This seat is fitted with a Top tether
anchorage point.
Never use a rear-facing child
restraint system on the front pas-
senger seat.
Detail information for CRS installation
■
Seat position number
Seating position suitable for
universal belted (yes/no)
i-Size seating position (yes/no)
*1
: Move the front seat fully rearward. If the
passenger seat height can be adjusted,
move it to the upper most position.
*2
: Adjust the seatback angle to the most
upright position. When installing a for-
ward-facing child seat, if there is a gap
between the child seat and the seat-
back, adjust the seatback angle until
good contact is achieved.
*3
: If the head restraint interferes with your
child restraint system, and the head
restraint can be removed, remove the
head restraint.
Otherwise, put the head restraint in the
upper most position.
*4
: Use only a front-facing child restraint
system.
Seating position
yes
yes
Forward-fac-
ing
no yes
yes yes
no yes