Lexus ES 250 Owner's Manual page 462

Solid, stationary, unpainted metallic point away from the battery and any mov-
D
ing parts as shown in the illustration
6AR-FSE engine

Positive (+) battery terminal (your vehicle)
A
Positive (+) battery terminal (second vehicle)
B
Negative (-) battery terminal (second vehicle)
C
Solid, stationary, unpainted metallic point away from the battery and any mov-
D
ing parts as shown in the illustration
4
Start the engine of the second vehi-
cle. Increase the engine speed
slightly and maintain at that level for
approximately 5 minutes to
recharge the battery of your vehi-
cle.
5
Open and close any of the doors of
your vehicle with the engine switch
off.
6 Maintain the engine speed of the
second vehicle and start the engine
of your vehicle by turning the
engine switch to IGNITION ON
mode.
7-2. Steps to take in an emergency
7
Once the vehicle's engine has
started, remove the jumper cables
in the exact reverse order from
which they were connected.
Once the engine starts, have the vehi-
cle inspected at your Lexus dealer as
soon as possible.
Starting the engine when the battery is
■
discharged
The engine cannot be started by push-start-
ing.
To prevent battery discharge
■
● Turn off the headlights and the audio sys-
tem while the engine is stopped.
● Turn off any unnecessary electrical com-
461
7