7. Other
[2]
[1]
7.3.16
Media feed driving unit
1. Remove the IR unit.
See P.50
48
[1]
A034F2C025DA
A034F2C089DA
[2]
[1]
A034F2C027DA
Field Service Ver. 1.0 Nov. 2008
13. Remove three screws [1], and
remove the PH unit [2].
NOTE
• To remove the front screw, move
the rack to the position where the
screw can be removed easier and
remove the screw using a short
driver.
2. Lay the main body of the printer on
its back.
NOTE
• Put the printer on the flat place
such as a desk for this work, not to
impose unreasonable force on the
machine.
3. Remove four screws [1], and remove
the plate [2].
NOTE
• Use care not to lose the two
springs.