Clear Data; Sram Clear; Memory Clear - Konica Minolta magicolor 1680MF Service Manual

Field Service Ver. 1.0 Nov. 2008

14.13 CLEAR DATA

14.13.1

SRAM CLEAR

To clear the settings for the functions listed at the right and return the functions to their
Function
default settings.
The following items are cleared (initialization).
• Menu mode (Except for [ADMIN. MANAGEMENT] - [USER SETTING] - [DATE&TIME]
that keeps its setting value):
Use
• Only [USER SERVICE MODE] of the user service mode: Set to default
• Only [TX/RX Result] of the Display mode: Clear
• Only [SERVICE'S CHOICE] and [SOFT SWITCH] of the Service mode: Set to default
NOTE
• Before executing [SRAM CLEAR], be sure to record the setting values that are to
be initialized through [SRAM CLEAR].
• For the record of the setting values, it is a good idea to have reports and lists
Setting/
printed.
procedure
• Some setting values are not included any of these reports or lists. Be sure to
make a note of them separately.
• After [SRAM CLEAR] has been executed, make necessary entries of data again
based on the setting values recorded.
14.13.2

MEMORY CLEAR

To clear the settings for the functions listed at the right and return the functions to their
Function
default settings.
The following items are cleared (initialization).
Use • Only [SERVICE'S CHOICE] and [FIXED ZOOM CHANGE] of the Service mode: Set to
default
NOTE
• Before executing [MEMORY CLEAR], be sure to record the setting values that are
to be initialized through [MEMORY CLEAR].
• For the record of the setting values, it is a good idea to have reports and lists
Setting/
printed.
procedure
• Some setting values are not included any of these reports or lists. Be sure to
make a note of them separately.
• After [MEMORY CLEAR] has been executed, make necessary entries of data again
based on the setting values recorded.
http://www.manuals4you.com
14. SERVICE MODE
153