Stopping Operation - Shindaiwa DGK180F Owner's And Operator's Manual

9-4. Stopping Operation

CAUTION : BURNS
 Do not touch the engine and surrounding components immediately after stopping the
engine as they are still extremely hot.
(1) Manual Start
1
Turn the switches and breakers on the load side to OFF.
2
Turn the three-phase and single-phase breakers on the operation panel to OFF.
3
Confirm that the "ACCESSORY" switch is set to OFF.
4
Turn the Throttle switch to IDLING.
5
The engine cools down for approximately three minutes.
6
Turn the starter switch to STOP.
< Note >
 Never turn accessory switch ON during operation. The engine keeps running while accessory
switch is ON.
 Set the STARTER SWITCH selector to STOP position if the generator will not be used for a
prolonged period. If you leave the selector in the AUTO or START position, the standby
current may drain the battery.
(2) Auto Start
1
The engine stops when the REMOTE START terminal opens.
2
Set the STARTER SWITCH selector to STOP.
< Note >
 Never turn accessory switch ON during operation. The engine keeps running while accessory
switch is ON.
 Set the STARTER SWITCH selector to STOP position if the generator may not be used for a
prolonged period. If you leave the selector in the "AUTO" or START position, the standby
current may drain the battery.
39