Calibration; About Calibration Channels - Konica Minolta CA-410 Instruction Manual

Calibration

1� About Calibration Channels
A CA-410 Series probe has calibration channels from CH00 to CH99 (100 channels in total).
CH00 is a channel for measurement in accordance with Konica Minolta's calibration standard. The channel is preset with
coefficients for Konica Minolta calibration, which cannot be changed by the user.
The following can be set for each channel between CH01 to CH99.
Correction coefficient for user calibration
In one calibration channel, the correction coefficients for user calibration are used in common for each measurement mode
(L x y, L u'v', Lv T p duv, X Y Z, and Dominant wavelength).
cp
v v
68