Konica Minolta CA-410 Instruction Manual page 87

7
Press the [UP] or [DOWN] key and the
[RIGHT]/[LEFT] keys to select the value
to set, and then press the [ENTER] key�
8
Press the [UP] or [DOWN] key and the
[RIGHT]/[LEFT] key to set values, and
then press the [ENTER] key�
9
Repeat steps 7 and 8� After setting is
completed, press the [UP] or [DOWN]
key to select the [Complete] button, and
then press the [ENTER] key�
(If the entered value is out of the available setting
range, the screen returns to the value entry screen.
Enter another value.)
10
Press the [ESC] key�
The measurement screen is displayed on the LCD
screen.
The specified values will be kept even if the POWER
switch is set to OFF ().
MENU
Target ＞ Select CH
Target
Edit Value
01 CH00
To confirm by pressing the ENTER button
CH01
CH02
in the "Complete"
CH03
Lv x y
山路を登りながら
CH04
160.2
CH05
CH06
CH07
CH08
CH09
85
0.3132 0.3257
Complete