Instrument Status At Power-On - Konica Minolta CA-410 Instruction Manual

Turning the Power ON/OFF
2� Instrument Status at Power-ON
By default, the instrument is in the following status when the POWER switch is set to ON.
1 Color Mode
2 Calibration channel No.
3 Target Value
4 PROBE
5 SYNC (measurement
synchronization mode)
6 ID
7 Measurement speed
8 RS-232C baud rate
9 Correction coefficient for user
calibration
Changing Method for (1) and (2)
(1) Color Mode ................... Press the MODE MODE key.
(2) Calibration channel ....... Press the [CAL CH] key followed by the [UP] or [DOWN] key.
Changing Method for (3)
(3) Target value ................... The current target value will be changed if a mode other than flicker is selected and a target
Changing Method for (4) to (9)
For (4) to (9), press the [MENU] key to display the menu screen, then switch to a relevant screen for setting.
P. 94
P. 68
P. 82
P. 65
P. 56
P. 78
P. 54
P. 109
P. 69
value is entered.
Lvxy
CH 00
x = 0.3127, y = 0.3290, Lv = 100.0 (cd/m
P1
UNIV.
CH 00
AUTO
38400 bps
Konica Minolta's standard data
50
2 )