Attaching/Removing The White Calibration Cap To/From The Zero Calibration Box - Konica Minolta CM-M6 Instruction Manual

Attaching/Removing the White Calibration Cap to/from the Zero
… „
Calibration Box
The white calibration cap can be attached to the zero calibration box for use as a set.
Attaching the White Calibration Cap
1
Open the zero calibration box as shown in the diagram.
2
Place the white calibration cap so that the white
calibration plate is facing downward, align the
screw holes for mounting the white calibration cap
(two locations) with the screw holes for mounting
the zero calibration box (two locations), and tighten
the screws.
3
Re-assemble the zero calibration box.
When the zero calibration box and the white calibration
Notes
plate are not in use, keep them away from external light
and dust.
1
22