Setting The Measurement Speed - Konica Minolta CA-410 Instruction Manual

Setting the Measurement Speed

Set the speed for measurement.
* Selectable measurement speeds: FAST/ SLOW / AUTO / LTD.AUTO
* Factory setting:
Operating Procedure
1
While the measurement screen is
displayed, press the [MENU] key�
The setting screen is displayed on the LCD screen.
2
Press the [UP] or [DOWN] key to select
[Meas Cond], and then press the [RIGHT]
or [ENTER] key�
3
Press the [UP] or [DOWN] key to select
[Meas Speed], and then press the
[ENTER] key�
4
The screen for selecting a measurement
speed is displayed� Press the [UP] or
[DOWN] key to select a measurement
speed�
• Selecting FAST can shorten measurement time,
but may compromise measurement repeatability
for low-luminance measurements.
• Selecting SLOW repeats FAST measurements
several times to ensure enhanced accuracy. Use
this mode when you want to perform
measurement with high repeatability.
• When AUTO is selected, the setting automatically
switches between "FAST", "SLOW", and "Longer
Integration Time" depending on the luminance
level.
• When LTD.AUTO is selected, measurements are
automatically selected between FAST and SLOW
settings depending on the luminance level.
5
Press the [ESC] key twice�
The measurement screen is displayed on the LCD
screen.
The measurement speed setting will be kept even if
the POWER switch is set to OFF ().
AUTO
56
[Meas Cond] - [Meas Speed]
M e a s C o n d S y n c M o d e
U s e r C a l i b M e a s S p e e d
T a r g e t T r i g g e r M o d e
O p t i o n I n t e r v a l M e a s
S y s t e m I n t e r v a l A l e r t
J E I TA f r e q r e s o l u t i o n
MENU
M e a s C o n d S y n c M o d e
U s e r C a l i b M e a s S p e e d
T a r g e t T r i g g e r M o d e
O p t i o n I n t e r v a l M e a s
S y s t e m I n t e r v a l A l e r t
J E I TA f r e q r e s o l u t i o n
MENU
M e a s C o n d S y n c M o d e
U s e r C a l i b M e a s S p e e d
T r i g g e r M o d e
T a r g e t
O p t i o n I n t e r v a l M e a s
S y s t e m I n t e r v a l A l e r t
J E I TA f r e q r e s o l u t i o n
Trigger mode 0-cal AUTO
NTSC
AUTO
OFF
OFF
OFF
0.07 Hz
Trigger mode 0-cal AUTO
NTSC
AUTO
OFF
OFF
OFF
0.07 Hz
Trigger mode 0-cal AUTO
◉ AUTO
○ LTD. AUTO
○ FAST
○ SLOW