Data Processor Ca-Dp40; About The Data Processor; 1� About The Data Processor; Standard Accessories - Konica Minolta CA-410 Instruction Manual

Data Processor CA-DP40

1� About the Data Processor
This data processor is designed to control probes that measure the luminance, chromaticity, and flicker of displays.
The processor supports connection to multiple probes (up to 10) to perform measurement simultaneously.
The processor can also be connected to a PC and controlled using PC software.
2� Standard Accessories
zAC adapter AC-A312F (AST036T-A120)
Supplies power through connection to an AC outlet via an AC cable.
Input: 100 to 240 V 50/60 Hz, 31 to 43 VA, 0.31 to 0.18 A
Output: 12 V 3 A
Plug design Center-positive
How to connect: Refer to page 47.
zAC cable
Used to connect the AC adapter to an AC outlet.
zProbe-DP RS cable (2 m) IF-A30
Connects the data processor to a probe via RS-232C.
Description in this manual
How to connect: Refer to page 45.
26