Probe Lineup; 2� Probe Lineup - Konica Minolta CA-410 Instruction Manual

2� Probe Lineup
The following probes are available according to the application.
Model
CA-P427 Ø27 Probe
CA-P427H Ø27 Probe for high luminance
CA-P410 Ø10 Probe
CA-P410H Ø10 Probe for high luminance
CA-MP410 Ø10 mini Probe
CA-MP410H Ø10 mini Probe for high luminance
CA-VP427 Ø27 High Sensitivity Probe
CA-VP410 Ø10 High Sensitivity Probe
CA-P427C Ø27 Probe (CIE 170-2:2015 compliant) CIE 170-2:2015–compliant probe with a measurement area of 27 mm
CA-P410C Ø10 Probe (CIE 170-2:2015 compliant) CIE 170-2:2015–compliant probe with a measurement area of 10 mm
CA-VP402 Ø2 Small Spot Probe
CA-VP404 Ø4 Small Spot Probe
CA-VP410T Ø10 LWD Probe (200 mm)
Note: • H igh-sensitivity probes CA-VP427 and CA-VP410, small spot probes CA-VP402 and CA-VP404, and LWD probe
CA-VP410T cannot measure flicker in CA-310 Mode.
• Use of a high-luminance probe is recommended for measuring a display that instantaneously shows high
luminance, such as CRTs.
• The CA-VP402 probe is designed for measurement of displays with a high pixel density, such as micro OLED
displays. The pixels within the measurement area may be insufficient when measuring smartphone displays or other
displays, and measured values may be unreliable due to the influence of position reproducibility.
(All Probes are Provided with Lens Caps)
Name
Probe with a measurement area of 27 mm
High-luminance probe with a measurement area of 27 mm
Probe with a measurement area of 10 mm
High-luminance probe with a measurement area of 10 mm
Compact probe with a measurement area of 10 mm
Compact high-luminance probe with a measurement area of 10 mm
High-sensitivity probe with a measurement area of 27 mm
High-sensitivity probe with a measurement area of 10 mm
Probe with a measurement area of 2 mm
Probe with a measurement area of 4 mm
Probe with a measurement area of 10 mm and a measurement distance of 200 mm
Description
13