Setting Measurement Data As Target - Konica Minolta CM-M6 Instruction Manual

Setting Measurement Data as Target

… „
Set the measurement data as the target data.
Display the sample to be set as the target on the <Sample> screen in advance.
Setting Procedure Start the procedure from the <Sample menu> - <Data management> screen.
• Target colors are stored with setting numbers from 0001 to 0200 being assigned. Even when the data at some point
Memo
is deleted, these setting numbers do not change.
• To set more accurate target color data, use averaging to measure the target specimen. For details, refer to the
"Average Measurement" section on pages 37 and 69 to 71.
• Be sure to perform white calibration before setting target colors.
Notes
• To ensure measurement accuracy, make sure to keep ambient conditions (temperature, etc.) constant.
• Unlike measured data, the numbers assigned to target color data do not change automatically. When
measuring colors continuously to set target colors, the cursor must be moved manually to set each data.
1
Use [] or [] to move the cursor to "Set Sample as
Target", and then press the [Confirmation] key.
The <Set Sample as Target> screen is displayed.
2
The target color data number being used will be
highlighted. Use [] or [] to move the cursor to
the color difference reference color number, and
then press the [Confirmation] key. When the target
color data is set, the screen returns to the <Target>
screen.
• If [ESC] is pressed without pressing the [Confirmation]
key, the screen will return to the <Data management>
screen.
If a number to which target color data has already been
Notes
set is selected, a message is displayed to confirm
overwriting. Use [] or [] to select "OK". Press the
[Confirmation] key. Moving the cursor to "Cancel" and
pressing the [Confirmation] key will cancel the deletion,
and the screen will return to the <Target> screen.
Sample
0002 TARGET-2
Sample menu [0013]
Data management
Delete data
Set Sample as Target
Change Target reference
0002 TARGET-2
Change list position
Sample
0002 TARGET-2
Sample menu [0013]
Data management
Set Sample as Target
Delete data
0002: TARGET-2
2016/08/23 16:27:53
Set Sample as Target
0 0 2 / 2 0 0
Change Target reference
0002 TARGET-2
Change list position
Sample
0002 TARGET-2
Sample menu [0013]
Warning
Data management
WARNING
Delete data
Are you sure you want to
overwrite all targets?
Set Sample as Target
Change Target reference
0002 TARGET-2
OK Cancel
Change list position
3
62