Operating The Instrument With External Power; Connecting The Ac Adapter - Konica Minolta T-10A Instruction Manual

Operating the Instrument with External Power

WARNING
Always use the AC adapter supplied as a optional accessory, and connect it to an AC
outlet of the rated voltage and frequency. Using a non-specified AC adapter or connecting
it to an incorrect AC outlet may damage the instrument or AC adapter, causing a fire
or electric shock.
If the instrument will not be used for a long time, disconnect the AC adapter from the AC
outlet. Accumulated dirt or water on the prongs of the AC power cord's plug may cause
a fire and should be removed.
The instrument should not be operated if it is damaged or AC adapter is damaged, or if
smoke or odd smells occur. Doing so may result in a fire. In such situations, turn the
power OFF immediately, remove the batteries (or disconnect the AC adapter from the AC
outlet), and contact the nearest Konica Minolta-authorized service facility.
CAUTION
The voltage/ampere rating of the AC adapter jack's is 8 V DC / 1.5 A. The jack's outer polarity is
positive (+), and the inner polarity is negative (–). This instrument is designed for use with the
AC adapter AC-A308 or AC-A311. Please do not use any other adapter with this instrument.
Read through this manual before powering up this instrument for the first time.

Connecting the AC Adapter

z When unplugging the AC adapter, always set the power switch to "O" (OFF) first.
1
Set the power switch to "O" (OFF).
2
Connect the AC adapter to the AC adapter terminal.
3
Insert the AC adapter's cord plug to an AC outlet.
25