Confirming The On/Off Status Of Addresses - Panasonic S-Link FP2 Manual

FP2 S−LINK Unit
2.
Note
After confirmation is made, always set the RUN/CHK. selector
switch back to the "RUN" position.
5.4.5.3

Confirming the On/Off Status of Addresses

It is possible to confirm the on/off status of the various addresses in the S−LINK.
Procedure:
1.
Press the system SET button.
Each time the system SET button is pressed, the addresses of the
S−LINK I/O devices where a fault has occurred blink, successively, in
the ascending order.
Using the MONITOR switch, select the numeric value
where the address to be confirmed is stored.
5.4 S−LINK I/O Device Address Recognition
MONITOR switch
Operation
next page
5 − 13