Assigning Inputs And Outputs; User−Determined Assignments - Panasonic S-Link FP2 Manual

I/O Assignments
3.3

Assigning Inputs and Outputs

3.3 Assigning Inputs and Outputs
3.3.1 User−Determined Assignments
Using programming software, I/O assignments are created, and the contents of the
assignments are stored in the system registers of the CPU. With this method, there is
no chance of I/O numbers being off even if the unit is installed in the wrong slot, or there
are empty slots.
The number of I/O points selected with the I/O setting switch (MODE) should be assigned
to the slot where the unit is installed.
Example:
When the I/O setting switch (MODE) is set to [4] (there are 64
points)
Note
Input and output for the S−LINK unit are specified using SX and SY.
Input: 16SX, 32SX, 64SX, 96SX, 8WSX
Output: 16SY, 32SY, 64SY, 96SY, 8WSY (8W indicates 128)
3 − 8
16−point input unit
X20 to X3F
Y40 to Y5F
FP2 S−LINK Unit
I/O setting switch (MODE) set to [4]