Panasonic S-Link FP2 Manual page 68

What To Do If An Error Occurs
7.3 Judging Error Displays
7.3 Judging Error Displays
7.3.1 Only a Numeric Value is Displayed
Example:
* This is a hexadecimal number display.
An error has occurred at the address that is displayed.
There is only one address where an error has occurred.
Turn off the power supply to the S−LINK (the power supply between D − G line), and
correct the error. Then turn on the power supply to the S−LINK (the power supply
between D − G line).
7.3.2 A Numeric Value and Decimal Points are Displayed
Example:
More than one error has occurred.
The numeric value that is displayed indicates the smallest address of the addresses
where errors have occurred.
7 − 6
* This is a hexadecimal number display.
Decimal points
FP2 S−LINK Unit
next page