Panasonic S-Link FP2 Manual page 69

Programmable controller

Hide thumbs Also See for S-Link FP2:

Table of Contents

FP2 S−LINK Unit

To check error addresses other than the one that is displayed, set the "RUN/CHK."

selector switch to the "CHK." position, and press the system SET button.

Turn off the power supply to the S−LINK (the power supply between D − G line), and

correct the error. Then turn on the power supply to the S−LINK (the power supply

between D − G line).

Note

Set the "RUN/CHK." selector switch to the "CHK." position before

pressing the system SET button.

What To Do If An Error Occurs

7.3

Judging Error Displays

7 − 7

Table of Contents