Parts Related To Cpu Operation (Cpu With S−Link) - Panasonic S-Link FP2 Manual

FP2 S−LINK Unit
2.2 Parts Related to CPU Operation (CPU with S−LINK)
Operation on the CPU side is the same as that on the standard−type CPU. For detailed
information, refer to the FP2 Hardware Manual.
CPU side
CPU with S−LINK
Model No. FP2−C1SL
Status indicator LEDs
1
display the operating condition and error statuses.
Initialize/test switch
2
is used to clear the errors, initialize the operation memory and set the test
operation mode.
Mode selector
3
is used to change the operation mode.
COM port (RS232C)
4
is used to connect a computer or general−serial devices with RS232C port.
Tool port (RS232C)
5
is used to connect a programming tool.
Operation condition switch
6
is used to set the baud rate of the programming tool, to select the program
memory and to select the writing operation for the program memory.
Memory backup battery
7
for backup of the internal memory (RAM)
Order number: AFC8801 (CR2450 or equivalent)
2.2 Parts Related to CPU Operation (CPU with S−LINK)
S−LINK side
Specifications
2 − 7