Table of Contents
Advertisement
Construction and Wiring
4.1
Wiring Methods for S−LINK Main Unit
Use an appropriate tool to tighten the terminal block.
When tightening the terminal block, a screwdriver designed exclusively for that purpose
should be used (see table below). The tightening torque should be 0.22 to 0.25 N−m (2.3
to 2.5 kgf−cm).
Appropriate tool (blade width 0.4 × 2.5)
Panasonic Electric Works SUNX Co., Ltd.
Order no.
AFP0806
4.1.2
Standard Wiring
Only the "Out A (main cable)" of the S−LINK terminal block is used.
Standard wiring
S−LINK unit
Power supply cable
Note
For information on power supply wiring, refer to section "4.2
S−LINK Power Supply". For information on wiring and connecting
S−LINK devices, refer to the "S−LINK Construction Manual."
4 − 4
S−LINK exclusive
flat cable
Out A
(main cable)
Phoenix Contact Co. model no.
Model no.
Product no.
SZS 0.4 × 2.5
1205037
Terminal name
Out A
24V
(Main cable)
(Main cable)
0V
D
G
FP2 S−LINK Unit
Color of
connecting cable
Brown
Blue
White
Black
Advertisement
Table of Contents
