Ricoh A318 Service Manual page 68

REPLACEMENT AND ADJUSTMENT
12.1.6 Feed Roller Replacement
1. Turn off the main switch.
2. Remove the lower entrance guide. (See Pick-up Roller Replacement.)
3. Loosen the front bracket [A] (2 screws).
4. Release the feed roller shaft [B] from the front bracket (1 E-ring, 1
bearing).
5. Remove the feed roller [C] (3 E-rings, 1 side roller, 1 pull-out roller).
NOTE: a) Take care not to lose the pins.
b) When installing the feed roller, make sure the gear side of the
roller faces the front (see illustration).
c) When installing the side and pull-out rollers, make sure the pins
are correctly inserted in the cut-outs of the rollers.
[C]
[B]
42
1 May 1993
[A]