Ricoh A318 Service Manual page 46

1 December 1990
[C]
4. Secure the DF mounting bracket [A] (4 screws).
5. Adjust the height of the DF mounting bracket as explained below:
1) Set the E plate [B] on the exposure glass as shown and measure the
clearance "a" between the DF mounting bracket and the E plate with a
scale.
2) Remove the DF mounting bracket and insert spacers [C] until the
clearance "a" is between 0 mm and 0.3 mm.
6. Remove the strip of tape [D].
[A]
[C]
8-26
[B]
[D]
a