1 May 1993
[A110 copier]
[B]
[A]
[D]
20. Connect the harness connector [A] to CN102 on the dc power supply unit
(A110 copier only).
21. Clamp the optional harness [B] as shown (A110 copier only).
22. Remove the DF main PCB cover [C] and turn off DIP switch 101-2.
NOTE: Make sure that DIP switch 101-1 is on and the other switches
(101-2, 3 and 4) are off.
23. Install the angle stopper [D] (2 screws [15]).
24. Install the original table [E].
INSTALLATION PROCEDURE (for Machine Code: A110/A111)
[E]
31
[C]