20 December 1991
7. Mount the DF on the DF mounting bracket by aligning the holes in the DF
and the pins [A] on the mounting bracket, them slide the DF to the left as
shown.
8. Secure the DF to the DF mounting bracket (4 screws [13]).
9. Install the 2 stud screws [B] as shown in the figure.
10. Install the lift switch actuator [C] (1 screw [16]).
11. Install the positioning sensor actuator [D] [24] (1 screw [17]).
INSTALLATION PROCEDURE (for Machine Code: A072)
[D]
[B]
25
[A]
[C]