Original Inversion Mechanism - Ricoh A318 Service Manual

1 May 1993

7.5 ORIGINAL INVERSION MECHANISM

1)
The two sided originals are inverted in the feed-out unit.
1) When the copier Start key is pressed, the two sided original is fed into the
feed-in unit, passing over the DF registration sensor [A]. The feed-out
motor [B] and the inverter solenoid [C] turn on 100 milliseconds after the
original trailing edge passes the registration sensor. When the inverter
solenoid turns on, the inverter pawls [D] rotate counterclockwise.
[D]
[E]
[A]
15
ORIGINAL FEED
[B]
[D]
[C]