Ricoh A318 Service Manual page 30

1 May 1993
9. Mount the DF on the DF mounting bracket aligning the holes in the DF
and the pins on the mounting bracket, then slide the DF to the left as
shown.
10. Secure the DF to the DF mounting bracket (4 screws [13]).
11. Secure the 2 stud screws [A] as shown in the figure.
12. Install the lift switch actuator [B] (1 screw [16]).
13. Install the sensor actuator [C] [23] (1 screw [17]) (A111 copier only).
INSTALLATION PROCEDURE (for Machine Code: A110/A111)
[C]
[A]
29
[B]