Ricoh A318 Service Manual page 40

31 October 1995
[A]
9. Attach the clamp [A] as shown (1 screw [27] in the accessories list).
10. Install the DF interface board [B] on the main board (2 studs [C] and 4
screws).
11. Connect the optics fiber cable connector (2P/Black) [D] and the dc
harness connector [E] to the DF interface board.
12. Secure the grounding wire [F] (1 screw and toothed washer).
INSTALLATION PROCEDURE
[C]
27
[F]
[B]
[E]
[D]
A318I510.wmf