Lenovo ThinkServer RD350G User Manual And Hardware Maintenance Manual page 98

7. Note the orientation of the ThinkServer RAID Super Capacitor Module. Then, lower the Super Capacitor
Module and gently slide it until it is secured by the mounting studs on the chassis.
Note: Depending on your server model, refer to one of the following illustrations below.
Figure 43. Installing the ThinkServer RAID Super Capacitor Module
8. Connect the ThinkServer RAID Super Capacitor Module to a RAID card.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation, go to "Completing the parts replacement" on page 142.
Removing the ThinkServer RAID Super Capacitor Module
your
page and
Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.
Note: Use any documentation that comes with the ThinkServer RAID Super Capacitor Module and follow
those instructions in addition to the instructions in this topic.
To remove the ThinkServer RAID Super Capacitor Module, do the following:
1. Remove all external media from the drives and turn off all attached devices and the server. Then,
disconnect all power cords from electrical outlets and disconnect all cables that are connected to
the server.
2. Prepare your server. See "Removing or extending the server from the rack cabinet" on page 57.
3. Remove the server cover. See "Removing the server cover" on page 57.
4. Disconnect the cable of the ThinkServer RAID Super Capacitor Module from the RAID card.
84
ThinkServer RD350G User Guide and Hardware Maintenance Manual
page
eading and