Replacing The Microprocessor - Lenovo ThinkServer RD350G User Manual And Hardware Maintenance Manual

12. Close the microprocessor retainer. Then, close the small handle
2
to lock the retainer into position and secure the new microprocessor in the socket.
Note: There are two marks on the microprocessor retainer. Open the small handle marked with
first and then open the other small handle marked with . Always follow the correct sequence when
you open the small handles.
Figure 65. Securing the microprocessor in the socket
13. Install the new heat sink that comes with the microprocessor option kit. See "Installing or replacing a
heat sink" on page 95.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation, go to "Completing the parts replacement" on page 142.

Replacing the microprocessor

your
page and
CAUTION:
The heat sink and microprocessor might be very hot. Turn off the server and wait several minutes to
let the server cool before removing the server cover.
Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.
page
1
first and then close the small handle
eading and
Chapter 6
101
.
Replacing hardware