ThinkServer RAID 710 Adapter
The following illustration shows the connectors on the ThinkServer RAID 710 Adapter.
Figure 11. ThinkServer RAID 710 Adapter
1
Connector 1
Used to connect a mini-SAS signal cable to the mini-SAS ports 0-3 on the backplane.
2
Connector 2
Used to connect a mini-SAS signal cable to the mini-SAS ports 4-7 on the backplane for 2.5-inch drives.
3
ThinkServer RAID Super Capacitor Module connector
Used to connect the cable of a ThinkServer RAID Super Capacitor Module.
.
Chapter 3
Product overview
29