Lenovo ThinkServer RD350G User Manual And Hardware Maintenance Manual page 127

5. Use a screwdriver to turn the handle lock
Figure 80. Opening the handle of the easy-swap drive or the dummy tray
6. Pull the handle and carefully slide the easy-swap drive or the dummy tray out of the front of the chassis.
Figure 81. Removing the easy-swap drive or the dummy tray
7. Do one of the following:
• If you are replacing an easy-swap drive, remove the four screws to remove the failing drive from the
drive tray.
Figure 82. Removing the drive from the drive tray
• If you are installing an easy-swap drive, go to the next step.
8. Touch the static-protective package that contains the new easy-swap drive to any unpainted surface on
the outside of the server. Then, take the new easy-swap drive out of the package.
1
to the unlocked position. The handle opens automatically.
.
Chapter 6 Replacing hardware
113