Lenovo ThinkServer RD350G User Manual And Hardware Maintenance Manual page 137

Figure 97. Installing the optical drive
8. Connect the connector
Figure 98. Connecting the connector
9. If necessary, connect the other end of the signal cable to the SATA connector for the optical drive on
the system board. See "System board components" on page 33.
10. If you are instructed to return the old optical drive, follow all packaging instructions and use any
packaging materials that are supplied to you for shipping.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 142.
1
to the rear of the optical drive.
1
to the rear of the optical drive
1
.
Chapter 6 Replacing hardware
123