Lenovo ThinkServer RD350G User Manual And Hardware Maintenance Manual page 97

Installing the ThinkServer RAID Super Capacitor Module
your
page and
Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.
Notes:
• You can install two ThinkServer RAID Super Capacitor Modules in your server.
• Use any documentation that comes with the ThinkServer RAID Super Capacitor Module and follow those
instructions in addition to the instructions in this topic.
To install the ThinkServer RAID Super Capacitor Module, do the following:
1. Remove all external media from the drives and turn off all attached devices and the server. Then,
disconnect all power cords from electrical outlets and disconnect all cables that are connected to
the server.
2. Prepare your server. See "Removing or extending the server from the rack cabinet" on page 57.
3. Remove the server cover. See "Removing the server cover" on page 57.
4. Touch the static-protective package that contains the ThinkServer RAID Super Capacitor Module to
any unpainted surface on the outside of the server. Then, take the ThinkServer RAID Super Capacitor
Module out of the package.
5. Locate the place for installing the Super Capacitor Module in the server. See "Server components"
on page 23.
6. Install the Super Capacitor Module into the holder.
Figure 42. Installing the Super Capacitor Module into the holder
page
eading and
Chapter 6
83
.
Replacing hardware