9. Align the holes in the drive tray with the corresponding ones on the new easy-swap drive. Then, install
the four screws to secure the drive to the drive tray.
Figure 83. Installing the drive to the drive tray
10. Slide the new easy-swap drive into the drive bay from the front until it snaps into position, and then
close the handle.
Figure 84. Installing the easy-swap drive
11. Do one of the following:
• If you are installing a drive, save the removed dummy tray in case that you later remove the drive
and need a dummy tray to cover the drive bay.
• If you are replacing a drive and are instructed to return the old drive, follow all packaging instructions
and use any packaging materials that are supplied to you for shipping.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To configure RAID, go to "Configuring RAID" on page 50.
Installing or replacing a 2.5-inch drive
You can install or replace a 2.5-inch drive without turning off the server, which helps you avoid significant
interruption to the operation of the system.
114
ThinkServer RD350G User Guide and Hardware Maintenance Manual